热稳定30玻纤增强尼龙66 AG6H
PA66 基础创新塑料(美国) AG6H 1001
玻璃纤维30％填充，添加热稳定剂 ROHS合规
Eurostar Staramide AG6H PA66, 30% Glass Filled, Injection Molded
AG6H是一个热稳定，30%玻璃纤维增强聚酰胺66树脂,注塑成型。
物理性能：
Density 1.37 g/cc 0.0495 lb/in³ ISO 1183
Moisture Absorption 1.20 %
@Temperature 23.0 °C 1.20 %
@Temperature 73.4 °F 50% RH; ISO 62
Water Absorption at Saturation 4.50 %
@Temperature 23.0 °C 4.50 %
@Temperature 73.4 °F ISO 62-1
Linear Mold Shrinkage, Flow 0.00200 - 0.00400 cm/cm 0.00200 - 0.00400 in/in on Tensile Bar; ISO 294
机械性能：
Hardness, Rockwell L 113 113 ISO 2039-2
Tensile Strength at Break 170 MPa 24700 psi 5 mm/min; ISO 527
Elongation at Break 3.00 % 3.00 % 5 mm/min; ISO 527
Tensile Modulus 9.40 GPa 1360 ksi 1 mm/min; ISO 527
Flexural Strength 260 MPa 37700 psi 2 mm/min; ISO 178
Flexural Modulus 9.00 GPa 1310 ksi 2 mm/min; ISO 178
Izod Impact, Notched (ISO) 8.00 kJ/m²
@Temperature -30.0 °C 3.81 ft-lb/in²
@Temperature -22.0 °F 80x10x4; ISO 180/1A
8.00 kJ/m²
@Temperature -40.0 °C 3.81 ft-lb/in²
@Temperature -40.0 °F 80x10x4; ISO 180/1A
9.00 kJ/m²
@Temperature -20.0 °C 4.28 ft-lb/in²
@Temperature -4.00 °F 80x10x4; ISO 180/1A
10.0 kJ/m²
@Temperature 23.0 °C 4.76 ft-lb/in²
@Temperature 73.4 °F 80x10x4; ISO 180/1A
Charpy Impact Unnotched 5.50 J/cm²
@Temperature -30.0 °C 26.2 ft-lb/in²
@Temperature -22.0 °F Edgew 80x10x4 sp=62; ISO 179/1eU
7.50 J/cm²
@Temperature 23.0 °C 35.7 ft-lb/in²
@Temperature 73.4 °F Edgew 80x10x4 sp=62; ISO 179/1eU
Charpy Impact, Notched 0.700 J/cm²
@Temperature -30.0 °C 3.33 ft-lb/in²
@Temperature -22.0 °F Edgew 80x10x4 sp=62; ISO 179/1eA
0.800 J/cm²
@Temperature 23.0 °C 3.81 ft-lb/in²
@Temperature 73.4 °F Edgew 80x10x4 sp=62; ISO 179/1eA