The SPM180-M series modules consists of 72pcs 125 x 125mm mono-crystalline silicon solar cell with high efficiency, high transmission rate and low iron tempered glass, anti-aging EVA and high frame resistant TPT to laminate, products have high efficiency, long life, easy installation, high wind and hail impact resistance, and more advantages
Encapsulation: glass/EVA/cells/EVA/TPT
Size and number of cells: 125 x 125mm 72/6 x 12pcs
Maximum power(Pm): 170W，175W, 180W，185W，190W
Tolerance: ±5%
Voltage at max power(Vmp): 34.9V
Current at max power(Imp): 4.87A，5.01A, 5.16A，5.3A，5.44A
Open circuit voltage(Voc): 43.2V
Short circuit current(Isc): 5.36A，5.51A, 5.68A，5.83A，5.98A
Maximum system open voltage: 1000V
Diodes: 2 by-pass
Dimensions: 1580 x 808 x 50mm
Weight: 18kg
Operate temperature scope: -40/+85℃
Relative humidity: 0 to 100%
Resistances: 227g steel ball fall down from 1m height and 60m/s wind
Warranty: Pm is not less than 90% in 10 years and 80% in 25 years
Test conditions: at STC 1,000W/, AM1.5, 25℃
Product standards: module certified to TUV、VDE、CE