1、能耗低、电机功率是同类产品的50-70%。
2、无需筛分机组，物料直接入机，减少设备投资。
3、本机只对超标物料进行破碎，合格物料直接落下，不增加过粉量。
4、减少土建投资、粗破、细破-机完成。
5、使用费用低、齿板可使用个小时。
6、使用稳定、故障率低，本机采用齿辊破碎，故无需反击板、方刚、锤头、衬板、簏板等易损件，只需 简单更换齿板。
7、齿辊采用子母槽差速设计，从而对物料的水份没有任何要求，且不粘不堵。
8、全时监控轴承振动频率及温度，轴承全时自动注油冷却。
9、噪音和振动相对其它系列成倍降低。
10、价格仅是同类进口设备的40-60%。
1, low energy consumption, the electrical power is 50-70% similar products.
2, no screening unit, the material directly into the machine, reducing investment in e
3, this machine only to be broken excessive materials, materials, direct drop, not increase over the amount of powder.
4, reduction of construction investment, thick broken, thin broken - machine to complete.
5, the use of low-cost, tooth plate can be used hours.
6, using a stable, failure rate is low, the machine used Roll Crusher, so no need to fight back board, Vincent Fang, hammer, linings, Toshi boards wearing parts, you simply replace the tooth plate.
7 Roll differential use of Picture-tank design, and thus there is no water on the material re, and the non-stick is not blocked.
8, full-time monitoring of bearing vibration frequency and temperature, bearing a full-time auto-oiling cooling.
9, noise and vibration compared to other series of double reduction.
10, the price of similar imported e is only 40-60%.