Aruba AP-ANT-1 Indoor Antennas
The AP-ANT-1 is a high-performance, tri-band, omnidirectional, indoor antenna ideally designed for multifunction access points that
require an omnidirectional coverage pattern for WLAN service delivery or air monitoring on both the 2.4 GHz and 5 GHz bands.
AP-ANT-1 has an articulating mount, providing flexibility in deployment and direct connection to Aruba access points with an onboard
RP-SMA connector. The AP-ANT-1 is the preferred choice for multi-purpose service deployment or wireless intrusion prevention (WIP).
It is offered in two colors to match the colors of Aruba indoor access points: the AP-ANT-1B antenna in off-white, and the AP-ANT-1W
antenna in white.
FreQueNCY/GAIN
2.4-2.5 GHz (3.8 dBi)
4.9-5.875 GHz (5.8 dBi)
PolArIzATIoN
Linear, vertical. Omnidirectional patterns
at all fre with increased gain in
mid and upper 5 GHz bands
beAmwIdTh
2.4-2.5 GHz
– E-Plane: 50 degrees
– H-Plane: 360 degrees
4.9-5.875 GHz
– E-Plane: 25 degrees
– H-Plane 360: degrees
ImPedANCe
50 ohms
mAxImum INPuT Power
2 watts
Vswr (mINImum PerFormANCe)
< 2.0:1
dImeNsIoNs (INChes/CeNTImeTers)
0.75” (1.9 cm) x 1.54” (3.9 cm) x 5.00” (12.7 cm)
housING
ABS, UV-resistant
FlY CAble leNGTh/CoNNeCTor
Articulating mount with built-in RP-SMA
oPerATING/sTorAGe TemPerATure
-10° C to +55° C (+14° F to +131° F)
INsTAllATIoN hArdwAre
N/A – antenna mounts directly to an Aruba AP
Technical hotline: one eight nine one five five one five five six six（一八九 一五五一 五五六六）