西门子PLC模块广州西门子通讯电缆代理商参数详情

订货数据

产品信息

概述

优势

应用

设计

功能

技术规范

尺寸图

更多信息

The IFN ANALOGINPUT (IFN AI) and IFN ANALOGINPUT-DISTANCE (IFN AI-D) are two robust interface nodes for SIPLUS CSM4000:

For provision of analog measured data for further processing in combination with the CMS X‑Tools software (X‑Tools must be ordered separately, see "Analysis Software" → "CMS X‑Tools")

The IFN AI has a measuring range of -10 V to +10 V and the IFN AI-D has an extended voltage range of -20 V to +20 V.

Can be used for high-accuracy, continuous monitoring in harsh environments

Thanks to the rugged design and IP67 degree of protection, the IFN ANALOGINPUT is suitable for use in rough industrial environments.

The compact design permits applications in confined areas.

Easy handling facilitates efficient commissioning and maintenance.

The IFN ANALOGINPUT is a robust interface node for SIPLUS CMS4000, designed for detecting voltages (-10 V to +10 V) in the frequency range from 0 Hz to 40 kHz.

The IFN ANALOGINPUT is used for high-accuracy, continuous monitoring in harsh environments.

The fronts of the IFN AI and IFN AI-D feature:

LEDs for status display

Six connections for analog inputs (-10 V to +10 V, -20 V to +20 V)

Three connections for IEEE1394 bus system

One connection for power supply

Connection to the higher-level evaluation PC is via an IEEE1394 bus system operating at 400 Mbit/s.

The module can be mounted on an IEC rail or with mounting brackets.

The IFN ANALOGINPUT enables up to six analog signals (-10 V to +10 V) to be recorded.

The maximum sampling frequency is 192 kHz per channel.

Article number6AT8000-1BB00-0XA06AT8000-1BB00-2XA0SIPLUS CMS4000 Interface Node AISIPLUS CMS4000 Interface Node AI-DGeneral information  Product type designationIFN AIIFN AI-DProduct descriptionup to six analog input signals can be measured with the IFN AIup to six analog input signals can be measured with the IFN AI-D in the range of ±20 VInstallation type/mounting  Mounting typestandard railMounting accessoriesMounting bracket, can be ordered as optionRequired clearance  ● for side-by-side mounting at the front80 mm● for side-by-side mounting at the top25 mm● for side-by-side mounting at the back25 mmSupply voltage  Design of the power supplystabilizedRated value (DC)24 Vpermissible range, lower limit (DC)18 Vpermissible range, upper limit (DC)32 VReverse polarity protectionYesOvervoltage protectionYes; max. 35 VInput current  from external supply (24 V DC), max.0.2 APower  Active power input, max.4.8 WAnalog inputs  Number of analog inputs6Designation of the analog inputCH1 ... CH6Electrical input frequency, min.0 HzElectrical input frequency, max.96 kHzOvervoltage strength, min.-60 VOvervoltage strength, max.60 VOpen-circuit detectionYesShort-circuit detectionNoInput ranges  ● VoltageYesInput ranges (rated values), voltages  ● At DC, min.-10 V-20 V● At DC, max.10 V20 VInput ranges (rated values), currents  ● with DC0.012 mAAnalog value generation for the inputs  Parameterizable down sampling fre / 8 / 16 / 24 / 48 / 64 / 96 kHzSampling frequency, max.192 kHzIntegration and conversion time/resolution per channel  ● Resolution with overrange (bit including sign), max.16 bitErrors/accuracies  Relative measuring accuracy for analog input signals, min.-0.5 %Relative measuring accuracy for analog input signals, max.0.5 %Crosstalk attenuation between analog input signals at 1 kHz-90 dBSignal-to-noise ratio for analog input signals-80 dBInterfaces  Number of interfaces3Design of plug-in connectionConnector plug 8-pole (M12)Transmission rate, max.400 Mbit/sProtocols  Bus protocol/transmission protocolIEEE 1394a/bPotential separation  Potential separation analog inputs  ● Potential separation analog inputsYesDegree and class of protection  IP degree of protectionIP67Standards, approvals, certificates  Certificate of suitabilityCECE markYesKC approvalYesChina RoHS complianceYesUse in hazardous areas  ● ATEXYes● IECExYesAmbient conditions  Ambient temperature during operation  ● min.-40 °C● max.65 °CAmbient temperature during storage/transportation  ● Storage, min.-40 °C● Storage, max.85 °C● Transportation, min.-40 °C● Transportation, max.85 °CConnection method  Design of electrical connection for supply voltageMale connector 5-pole (M12)Design of electrical connection at inputConnector plug 5-pole (M12)Design of electrical connection for the PE conductorM4 screw with contact washer● Connectable conductor cross-section for PE terminal2.5 mm²Mechanics/material  Material of housingaluminumDimensions  Width86 mmHeight210 mmDepth87 mmDepth when mounted on DIN rail96 mmWeights  Weight (without packaging)1.23 kg

IFN ANALOGINPUT