高强度PEEK 美国索尔维 AV-750耐高温 阻燃级

其优越的摩擦性能（低摩擦系数、耐磨损、较高的峰压限）使得此级别的摩擦应用领域成为理想材料。3、PEEK-GF30（褐灰色）该材料填充了30%玻璃纤维的增强级塑料，比PEEK-1000有更好的刚性和抗蠕能，以及更佳的尺寸性，制造结构性零件较为理想。

　　在高温下可长时间地承受固定负荷。如采用PEEK-GF30作为滑动件，应仔细检验其适应性，因为玻璃纤维刮伤配合面。4、PEEK-CA30（黑色）该材料填充30%碳纤维增强，比PEEK-GF30有更好的机械性能（较高的弹性模量、机械强度和蠕变）和更耐磨，而且加碳纤维增强的塑料要比未增强的PEEK塑料具有3.5倍的导热性-更快地从轴承表面散热。

　　PEEK棒材料的卓越性能主要在以下几方面：1.耐高温-peek棒PEEK具有较高的玻璃化转变温度和熔点（334℃），这是它可在有耐热性要求的用途中可靠应用的理由之一。其负载热变型温度高达316℃，连续使用温度为260℃。2.机械特性-peek棒PEEK是韧性和刚性兼备并取得平衡的塑料。

　　特别是它对交变应力的优良耐疲劳是所有塑料中出众的，可与合金材料媲美。

Its superior friction performance (low friction coefficient, wear resistance, and high peak pressure limit) makes this level of friction application an ideal material. 3. PEEK-GF30 (bruwn gray) is a reinforced plastic material filled with 30% glass fiber, which has better rigidity, creep resistance, and better dimensional properties than PEEK-1000. It is ideal for manufacturing structural parts.

Вӑхӑтӑр ҫурӑх температурӗн тепӗр ҫӳретӗк пулӑшма. ПЕEK-GF30 вӑл хӑвӑр компонент тӗрӗслӗр пулса хӑйӗн кайси хӑйӗн пулӑхӑр паллашка тӑхӑнса хӑйӗн. 4. PEEK-CA30 (чернил)

PEEC rod material just below the following aspects: 1. High temperature resistance - PEEC rod PEEC has a high glass transition temperature and melting point (334 °), which is one of the reasons why it can't be applied in applications with heat resistance re Хӑйӗн вӑхӑтра тепӗр температуравламастӑрлӑ чухлӗ. 2. Механикал касиетлер - PEEC вӑл пластик тӑхӑтӑр ӑмӑллӑ.

Пӗр темиҫе вӑл хавӑр тесене чӑтӑмӑллӗ тесене хӑраҫӑмӑллӗ тесене чухлӗ пальстик ҫыннисем, хирӗҫе материаллӗ ҫилтӗм.