Monprene® MP-2104Thermoplastic ElastomerTeknor Apex公司产品说明：Monprene MP-2104 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications re a soft, rubber-like feel. Monprene MP-2104 is a low hardness, opaque grade that exhibits excellent mold release, suitable for injection molding and extrusion.物性信息：基本信息特性高弹性良好的流动性良好的柔韧性良好的撕裂强度良好的着色性脱模性能良好用途安全设备把手柔软的把手体育用品文具消费品应用领域牙刷柄RoHS 合规性RoHS 合规外观不透明形式粒子加工方法挤出注射成型物理性能额定值单位制测试方法比重0.878g/cm³ASTM D792熔流率（熔体流动速率）ASTM D1238 190°C/2.16 kg1.5g/10 minASTM D1238 200°C/5.0 kg18g/10 minASTM D1238硬度额定值单位制测试方法肖氏硬度ASTM D2240 邵氏 A30ASTM D2240 邵氏 A, 5 秒28ASTM D2240弹性体额定值单位制测试方法拉伸应力ASTM D412 ****应变0.689MPaASTM D412 300%应变1.34MPaASTM D412抗张强度 (断裂)6.48MPaASTM D412伸长率 (断裂)820%ASTM D412撕裂强度 - 流量 122.6kN/mASTM D624压缩yongjiu变形 (23°C, 22 hr)12%ASTM D395法律声明The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.注射额定值单位制料筒后部温度182 到 232°C料筒中部温度188 到 238°C料筒前部温度193 到 243°C射嘴温度199 到 249°C加工（熔体）温度199 到 249°C模具温度16 到 32°C注塑压力1.38 到 5.52MPa注射速度快速背压0.172 到 0.689MPa螺杆转速50 到 100rpm垫层3.81 到 25.4mm注射说明无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。挤出额定值单位制料筒1区温度182 到 232°C料筒2区温度188 到 238°C料筒3区温度193 到 243°C料筒4区温度193 到 243°C料筒5区温度199 到 249°C口模温度199 到 249°C挤压说明螺杆转速30 - 100 rpm备注1 .C 模具