TOPAS® 6013S-04Cyclic Olefin CopolymerTopas Advanced Polymers, Inc.产品说明：Product DescriptionTOPAS 6013S-04 is a general purpose injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected ApplicationsDrug deliveryLabwareOpticsElectronicsFood packagingHealthcare and food contactLeading AttributesLow leachables & extractables, low water transmissionTemperature resistance, clarity and purityClarity, low birefringence, low moisture sensitivityLow dielectric constant, thermoplasticNot manufactured with BPA, phthalates, or halogensBroad regulatory complianceRelated Grades for Injection Molding, Healthcare, Optics and DiagnosticsTOPAS 6013M-07 - broader processing version especially suited for IBM/ISBMTOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocolsTOPAS 5013L-10 - high flow grade, lubricated for greater processing versatilityTOPAS 5013S-04 - high flow grade without lubricantTOPAS IT X1 - impact grade for applications requiring extra toughness物性信息：基本信息特性纯度高低萃取物防潮辐射消毒共聚物环氧乙烷消毒耐化学性良好耐热性，高清晰度，高食品接触的合规性通用无 BPA无定形的无卤用蒸汽消毒用途电气/电子应用领域光学应用实验室器具食品包装通用医疗/护理用品机构评级DMF 12132FDA FCN 405ISO 10993USP 第VI类欧洲 10/1/2011 12:00:00 AM外观清晰/透明形式粒子加工方法注射成型物理性能额定值单位制测试方法密度1.02g/cm³ISO 1183熔流率（熔体流动速率） (260°C/2.16 kg)13g/10 minISO 1133溶化体积流率（MVR） (260°C/2.16 kg)14.0cm³/10minISO 1133收缩率 10.50 到 0.70%内部方法吸水率 (饱和, 23°C)0%ISO 62机械性能额定值单位制测试方法拉伸模量2900MPaISO 527-2/1A/1拉伸应力 (屈服)63.0MPaISO 527-2/1A/50拉伸应变 (屈服)2.7%ISO 527-2/1A/50冲击性能额定值单位制测试方法简支梁缺口冲击强度 (23°C)1.8kJ/m²ISO 179/1eA简支梁无缺口冲击强度 (23°C)15kJ/m²ISO 179/1eU热性能额定值单位制测试方法热变形温度 (0.45 MPa, 未退火)130°CISO 75-2/B玻璃转化温度138°CISO 11357-2维卡软化温度137°CISO 306/B50电气性能额定值单位制测试方法体积电阻率> 1.0E+16ohms·cmIEC 60093相对电容率IEC 60250 1 kHz2.35IEC 60250 10 kHz2.35IEC 60250耗散因数 (1.00 GHz)7.0E-5IEC 60250漏电起痕指数> 600VIEC 60112可燃性额定值单位制测试方法UL 阻燃等级 (1.60 mm)HBUL 94光学性能额定值单位制测试方法折射率1.530ISO 489透射率91.0%ISO 13468-2注射额定值单位制干燥温度100°C干燥时间4.0 到 6.0hr料筒后部温度230 到 260°C料筒中部温度240 到 280°C料筒前部温度260 到 290°C射嘴温度240 到 300°C加工（熔体）温度240 到 300°C模具温度95.0 到 130°C注塑压力50.0 到 110MPa注射速度中等偏快保压30.0 到 60.0MPa背压< 15.2MPa螺杆转速50 到 200rpm注射说明Feed temperature: