TOPAS® 6013M-07Cyclic Olefin CopolymerTopas Advanced Polymers, Inc.产品说明：Product DescriptionTOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected ApplicationsDrug deliveryPrefilled syringes, vials, cartridgesBottles and tubesSurgical instrumentsIV containers and componentsLabwareOpticsElectronicsFood packagingHealthcare and food contactLeading AttributesLow leachables & extractables, low water transmissionNon-ionic, does not promote adsorption like glassMinimally reactiveChemically resistant to alcohol, acetone, and acrylatesTransparent, withstands EtO/gamma/steam sterilizationTemperature resistance, clarity and purityClarity, low birefringence, low moisture sensitivityLow dielectric constant, thermoplasticNot manufactured with BPA, phthalates, or halogensBroad regulatory complianceRelated Grades for Injection Molding, Healthcare, Optics and DiagnosticsTOPAS 6013S-04 - standard processing version with standard flowTOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocolsTOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C)TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatilityTOPAS 5013S-04 - high flow grade without lubricantTOPAS IT X1 - impact grade for applications requiring extra toughness物性信息：基本信息特性纯度高低萃取物防潮辐射消毒共聚物环氧乙烷消毒耐化学性良好耐酒精耐热性，高清晰度，高食品接触的合规性无 BPA无定形的无卤用蒸汽消毒用途吹塑成型应用电气/电子应用领域管件光学应用瓶子实验室器具食品包装外科器械药品包装医疗/护理用品机构评级DMF 12132FDA FCN 405ISO 10993USP 第VI类欧洲 10/1/2011 12:00:00 AM外观清晰/透明形式粒子加工方法Injection Stretch Blow Molding注吹成型注射成型物理性能额定值单位制测试方法密度1.02g/cm³ISO 1183熔流率（熔体流动速率） (260°C/2.16 kg)12g/10 minISO 1133溶化体积流率（MVR） (260°C/2.16 kg)13.0cm³/10minISO 1133收缩率 10.50 到 0.70%内部方法吸水率 (饱和, 23°C)0.010%ISO 62机械性能额定值单位制测试方法拉伸模量2900MPaISO 527-2/1A/1拉伸应力 (屈服)63.0MPaISO 527-2/1A/50拉伸应变 (屈服)2.6%ISO 527-2/1A/50冲击性能额定值单位制测试方法简支梁缺口冲击强度 (23°C)2.0kJ/m²ISO 179/1eA简支梁无缺口冲击强度 (23°C)14kJ/m²ISO 179/1eU热性能额定值单位制测试方法热变形温度 (0.45 MPa, 未退火)130°CISO 75-2/B玻璃转化温度142°CISO 11357-2光学性能额定值单位制测试方法折射率1.530ISO 489透射率91.0%ISO 13468-2注射额定值单位制料筒后部温度230 到 260°C料筒中部温度240 到 270°C料筒前部温度250 到 280°C射嘴温度240 到 300°C加工（熔体）温度240 到 300°C模具温度95.0 到 125°C注塑压力50.0 到 110MPa注射速度中等偏快保压30.0 到 60.0MPa背压< 15.0MPaScrew Speed50 到 200rpm注射说明Feed Temperature: