商品描述交易保障价格说明联系我们类型正牌料用途级别通用级 增韧级 管材级 耐热级 增强级 食品级销售方式品牌经销加工级别注塑级 挤出级中文名聚烯烃产地韩国规格25KG牌号C5070D特性级别耐高温 耐老化 电绝缘性供应商东莞市博琪塑胶是否进口是形式粒子阻燃等级HB厂家(产地)沙伯基础创新品名乙烯-辛烯共聚物POE有效成分含量玻纤增强SABIC® FORTIFY™ C5070DThermoplastic Polyolefin ElastomerSaudi Basic Industries Corporation (SABIC)产品说明：SABIC® FORTIFY™ C5070D is an ethylene octene copolymer produced by solution polymerization using metallocene catalyst. This product is available as free flowing pellets.SABIC® FORTIFY™ C5070D is designed as a low density and high performance copolymer modifier to provide superior impact properties and flow characteristics.Typical applications are impact modifier in thermoplastic olefin compounds, footwear midsoles and wire and cable extrusion.Please take notice of specific storage and handling conditions.This product is not intended for and must not be used in any pharmaceutical/medical applications.物性信息：基本信息特性低密度共聚物抗撞击性，良好良好的流动性辛烯共聚单体用途电线电缆应用复合塑料改性鞋类形式粒子加工方法电线&线缆挤出成型化合物挤出物理性能额定值单位制测试方法密度0.868g/cm³ASTM D1505熔流率（熔体流动速率） (190°C/2.16 kg)5.0g/10 minASTM D1238门尼粘度 (ML 1+4, 121°C)8MUASTM D1646硬度额定值单位制测试方法肖氏硬度ASTM D2240 邵氏 A, 1 秒63ASTM D2240 邵氏 D, 1 秒16ASTM D2240机械性能额定值单位制测试方法拉伸模量 - **** 正割2.30MPaASTM D638抗张强度 (断裂)6.00MPaASTM D638伸长率 (断裂)1****ASTM D638弯曲模量 - 1% 正割10.8MPaASTM D790弹性体额定值单位制测试方法撕裂强度 135.3kN/mASTM D624热性能额定值单位制测试方法玻璃转化温度-52.0°C内部方法熔融温度62.0°C内部方法补充信息All physical properties were measured on compression molded specimens.备注1 .C 模具POE基础创新塑料(沙特)C5070D特性低密度共聚物抗撞击性，良好良好的流动性辛烯共聚单体