PBT玻纤增强50%B4300G10巴斯夫PBT现货供应---Injection molding grade with 50 % glass fibers for very rigid technical parts (eg PCBs and small motor housings).B4300G10巴斯夫PBT：注塑级，含50%玻璃纤维，用于非常坚硬的技术部件（如PCB和小型电机外壳）。B4300G10的特性刚性，高B4300G10的用途Electric Motor Housings工程配件印刷电路板机构评级EC 1907/2006 (REACH)RoHS 合规性RoHS 合规B4300G10外观黑色可用颜色自然色形式粒子加工方法注射成型多点数据Creep Modulus vs. Time (ISO 11403-1)Isochronous Stress vs. Strain (ISO 11403-1)Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Shear Modulus vs. Temperature (ISO 11403-1)Viscosity vs. Shear Rate (ISO 11403-2)树脂ID (ISO 1043)PBT-GF50B4300G10的物理性能额定值单位制测试方法密度1.73g/cm³ISO 1183表观密度0.70 到 0.80g/cm³溶化体积流率（MVR） (250°C/2.16 kg)3.50cm³/10minISO 1133吸水率ISO 62 饱和, 23°C0.40%ISO 62 平衡, 23°C, 50% RH0.20%ISO 62粘数 197.0cm³/gISO 307模具收缩性 2 free, longitudinal0.20% free, transverse0.90%热性能额定值单位制测试方法温度指数 - at 50% loss of tensile strengthIEC 60216 -- 3140°CIEC 60216 -- 4160°CIEC 60216zui高使用温度 - short cycle operation210°C可燃性额定值单位制测试方法Flammability by Electrical Sources of Ignition - Method BH (4.00 mm)BH2IEC 60707