EVERLUBE ECOALUBE 642 MIL-L-46010E Type II

Everlube Ecoalube 642 热固化涂层is a thermally cured, MoS2 based solid film lubricant with a high molecular weight epoxy binder system. This coating provides excellent chemical resistance, wear life, abrasion resistance and performs best in higher load carrying applications.

Approvals/References/Specs

Honeywell Airesearch Specification: EMS 52402, Rev. M–T, Type XII

Honeywell Airesearch Specification: FP-88, Type 03

Honeywell Allied Signal Specification: 91547-P6435G-P1

Amphenol Electronics Corp. Specification: 123-1008

Army Missile Command Specification: MIS-13107

Boeing Specification: BAC 5811N, Type VI, Cl. 3

Cessna Specification: CCM-19C, Type 4

Chrysler Corporation Specification: 2279897

Consolidated Controls Specification: S-2165

Controllex Eanco Specification: ED-49 Rev. A & B

Fatigue Tech, Inc. Specification: FTI 8403C

Ford Specification: ESA-M21P24-A1

General Dynamics-Space Systems Div. Specification: 0-06313

General Motors-Inland Div. Specification: M 1841

Gulfstream American Specification: 3306

Hughes Offshore Specification: 3221

Jet Avion Corporation Specification: JA474 thru Rev. B

Litton Industries Specification: 893315, Rev. A (Type 45,46,47)

Lockheed Martin Corporation-Aircraft Div. Specification: LCM 34-1254B (34.1402)

Lockheed Martin Corporation-Aircraft Div. Specification: LCP 81-2064, Type II

Lockheed Martin Corporation-Aircraft Div. Specification: LCP 81-2064D(Am.1), Type II (400°F Cure)

Lockheed Martin Corporation-Aircraft Div. Specification: STP 62-005B, Type IV

Boeing McDonnell Douglas Specification: DPM 388-10

US Military Specification: MIL-L-46010A

US Military Specification: MIL-L-46010B, Type II, Amend 2

US Military Specification: MIL-L-46010C, Type II

US Military Specification: MIL-L-46010D, Type II

US Military Specification: MIL-L-46010E, Type II

US Military Specification: MIS-13107

Minebea Specification: RP21809A

Northrop Grumman Corporation Specification: L-7

Parker Hannifin Corporation Specification: BPS4528 Ty 8

Pratt & Whitney Canada Specification: CPW 428 F

Raychem Corp. Specification: MEPS-6064

Rockwell Specification: LAO112-001, Type I, Cl. 3

Rohr Corporation Specification: RPS 13.81, Rev. P, Type 4

Textron Lycoming Engines Specification: P6435A thru H, -P1 (or Ty. I)

Vickers Aero Hydraulics (Eaton Aero) Specification: VS 1-3-1-166

Weber Aircraft Specification: WPS-303, Rev. C, 3.3.1

Features

Excellent wear life

Excellent chemical resistance

Excellent abrasion resistance

Ideal for higher load carrying applications

Typical Applications:

Bushings, shafts, splines and cams

Slides, guides and rails

Virtually all fasteners

Threaded connectors and disconnects

Physical Properties

Lubricating Solid: MoS2

Binder: High molecular weight epoxy

Color and Appearance: Gray/Black matte finish

Carrier: Solvent Borne

Solids (by weight): 40% to 44%

Density: 9.6 ± 0.5 lb/gal (1150 ± 60 grams/liter)

Flash Point: 24°F (-4°C)

Volatile Organic Compound: 695 grams/liter (5.8 lb/gal)

Theoretical Coverage1: 540 ft²/gal @ 0.5 mils (13.2 m²/liter @ 12.7 microns)

Alternative or Repair Coatings: A low VOC alternative coating for Ecoalube 642 is our Everlube 9002. For touch-up applications, Perma-Slik G or Lubri-Bond 220 works well with Ecoalube 642.