- 发布
- 苏州市威迪特工业设备有限公司
- 价格
- ￥40000.00/件
- 品牌
- 威迪特
- 机器宽度
- 1000mm
- 机器高度
- 1500mm
- 机器长度
- 1800mm
- 起订
- 1件
- 供应
- 10件
- 发货
- 3天内
- 电话
- 0512-66537128
- 手机
- 19852907234
- 发布时间
- 2025-04-06 17:13:45
开料机（KLJ)
开料设备CUTTING E
产品用途 PRODUCT USE
该设备用于将盘管开卷、校直、无屑切断成为定尺直管;主要应用于空调、热水器、飞机汽车等管路得下料要求。
This e is used for uncoiling, straightening and cutting the coil into straight pipe with fixed length; it is mainly used for the blanking re of air conditioning, water leater, aircraft and automobile pipelines
| 技术参数Technical parameters | |||
| (MAX)加工管径 | 可选配 13: φ13mm ¨ 20: φ20mm ¨ | ||
| Max pipe diamerer | |||
| 加工工位 | 可选配 1:单管 ¨ 2:双管¨ 4:四管 ¨ 6:六管 ¨ | ||
| Processing station | 1:Single pipe 2:Two pipes 4:Four pipes 2+4：Double two pipes | ||
| 一次送料长度 | 可选配 500: 500mm ¨ 1000: 1000mm ¨ x: 连续送料 ¨ | ||
| One feeding length | X: Continuous feeding | ||
| 放料架 | 可选配 E:主动式 ¨ P:被动式 ¨ | ||
| Cradle | E:Subject-verb form P:Passive | ||
| 放料架可旋转 | 可选配 1：单面 ¨ 2:双面可旋转 ¨ | ||
| Cradle can rotate | 1：Single-sided 2:Two sideds can rotate | ||
| 材质 | 盘型铜管TP1/2或相当标准产品 | ||
| Material | Disc type copper pipe TP1/2 or e products | ||
| 铜管外径 | φ6.0-φ20 | ||
| Outer diameter of brass | |||
| 铜管壁厚 | 0.3mm-1.5mm | ||
| Brass wall thickness | |||
| 料盘外径 | φ1000-φ1250 | ||
| Outer diameter of the tray | |||
| 料盘中心孔径 | φ130 | ||
| The center aperture of the tray | |||
| 料盘间距 | 250-340 | ||
| Spacing of the trays | |||
| 盘管重量 | ≤280kg | ||
| Coil weight | |||
| 气压范围 | 0.5-0.7MPa | ||
| Air pressure range | |||
| 使用电源 | 三相四线AC380V 50Hz | ||
| Power supply | (hree-phase four-wire) | ||
| 总功率 | 4.5KW | ||
| Totalpower | |||
| 直线度公差 | ≤20‰ | ||
| Straightness tolerance | |||
| 一次开料平齐度 | ≤0.5mm(L=1000) | ||
| material to open evenness | |||
| 表面状况 | 铜管表面无明显拉、划、压伤痕 | ||
| Surface condition | Brass surface without obvious pull, stroke, pressure scar | ||
| 管口内径缩口率 | f<20%(实际壁-厚壁厚)/壁厚 | ||
| Orifice diameter | F& It: 20%(actual wall thickness- wall thickness)/ wall thickness | ||
| 铜管不圆度 | ≤3% | ||
| Copper pipe is not round | |||
| 生产效率 | 8次/分钟(L=1000) | ||
| Productivity | 8 times/min (L=1000) |
购物须知：
因本店所有宝贝涉及加工订制，详情页所描术技术参数是常规可满足的，超出参数范围可以进行非标订制。具体详情请联系客服人员，我司将由技术部人员设计方案，再由工程部核算价格，确认好后方可付款。