FF-2000.6/1KV4X4平方线缆大余欢迎加入ZR-YJV22R3X35+2X25平方电力电缆安详
4、使用特性：电缆在-40℃-+50℃环境下使用。电缆导体长期工作温度应不超过70℃。普通护套的电缆在环境温度不低于-5℃下敷设，耐塞护套为-10℃。弯曲半径不低于电缆外径的15倍（敷设时），且适用于任何水平差的干扰KVV聚氯乙烯绝缘，聚氯乙烯护套控制电缆敷设在室内、电缆沟中、管道内及地下。
本工艺规范的主要型号有：额定电压450/750V：ZA-RV；WDZA-RY等。额定电压0.6/1kV:ZA-RVV、ZA-RVV22、WDZA-RYY、WDZA-RYY23、WDNA-RYY、WDNA-RYY23。
Temperature (25 ℃) 20 to 30 to 35 40 to 45
HYAT22：铜芯实心聚烯烃绝缘填充式挡潮层聚乙烯护套钢带铠装聚氯乙烯护套市内通信电缆。HYAT23：铜芯实心聚烯烃绝缘填充式挡潮层聚乙烯护套钢带铠装聚乙烯护套市内通信电缆。HYV:铜芯实心聚烯烃绝缘聚氯乙烯护套市内通信电缆。
ia-K3YVY本安型PE绝缘PVC护套三芯绞合屏蔽控制电缆适用于要求柔软的场合。ia-K3YV（EX）本安型PE绝缘PVC护套三芯绞合屏蔽仪用电缆固定敷设在室内、电缆沟或管道中。ia-k3YVR（EX）R本安型PE绝缘PVC护套三芯绞合屏蔽仪用软电缆适用于要求柔软的场合。
任何两块金属导体中间隔以绝缘体就构成了电容器，金属导体称极板绝缘体介质。以介质材料分类，电容器可以分为空气介质电容器、液体介质电容器、无机介质电容器以及电解质电容器等。根据形式的不同，电容器还可以分为固定电容器、可变电容器、半可变电容器。还可按材料、用途不同而进行分类。电容器能储存电荷而产生电场，所以它是储能元件。电容量是电容器的重要参数。它是电容器极板上的带电量Q与电容器两端电压U之比，即C=Q/U式中C-电容，F（法拉）；Q-电量，C（库仑）；U-电压，V（伏）。
阻燃电缆电线电缆电缆的燃烧是由于外部加热而产生了易燃气体，要达到阻燃的目的，必须抑制引起燃烧的三要素，即：可燃气体、热量和氧气。此外，卤化氢气体与空气中的水一旦反应后，即生成“卤化氢酸”，严重腐蚀仪器设备、建筑物造成“二次灾害”。
主要用于火灾报警、消防设备、排烟设备、以及紧急通道运输、照明等应急设施的供电线路中需要耐火的场合。（4）电缆安装时的最小弯曲半径:a、低烟无卤阻燃、耐火控制电缆：无铠装层的电缆应不小于电缆外径的6倍，有铠装或铜带屏蔽结构的电缆应不小于电缆外径的12倍。
2：本安型热电偶用补偿导线IA-KX-GA-YVP聚乙烯绝缘聚氯乙烯护套铜丝编织屏蔽精密级K分度号本安热电偶补偿导线IA-KX-GA-YVRP聚乙烯绝缘聚氯乙烯护套铜丝编织屏蔽精密级K分度号本安热电偶补偿软导线IA-KX-HA-FFP氟塑料绝缘和护套铜丝编织屏蔽精密级K分度号本安热电偶补偿导线。
Spin cassette XF5-273 communication cable transfer box, adopting advanced technology at home and abroad, in accordance with the international advanced standard production in the eighty s of cable wiring e, for the city, the town of telecommunication network backbone cable and wiring cable transfer. Features: 1. The connection jumper adopts rotary clamp-type connection and is sealed with silica gel on the metal clip, because it is not only reliable and durable, but also easy to operate and repair without stripping. 2. The wiring terminals in the handover box shall be arranged in 25 pairs as a basic unit, consistent with the basic units of the local telephone cables and marked with Numbers on the terminals to facilitate construction and maintenance. 3. The structure, arrangement and installation dimensions of the wiring modules are exactly the same as those of 3M products and can be used for each other. 4. The box body is treated by electrostatic spraying, beautiful and generous, with clear lines, good anti-corrosion and waterproof performance and long service life. Main technical parameters: the environment temperature: - 40 ℃ ~ + 65 ℃ atmospheric pressure: 70 ~ 106 kpa relative humidity: 95% or less is random ends and insulation resistance between terminals and ground > 5 x 104 Μ Ω. When connecting any two ends and any terminals and grounding to 1000V ac, there shall be no breakdown or flying arc in 1min. Contact resistance between wire and terminal < 5 x lO - 3 Ω.
使用特性•工频额定电压U0/U:0.6/1kV。单芯电缆不允许敷设在磁性管道中。本产品适用于各种火灾危险较大，消防安全重要性较高场所的电气装备及控制系统作连接线。一、产品特点及用途耐高温防火控制电缆具有较高的耐火性能，经受火焰直接燃烧下，在一定的时间内不发生短路和断路故障，因此，在火灾发生时，有利于减少损失。
The company solemnly declares: 1. Sign the product guarantee letter, and promise that the un products will never leave the factory. 2. Product tracking service within two years and keep records in the archives for 20 years. 3. Due to product problems, our company will guarantee, refund, replacement and customer re
一般来说是三种信号，从dcs角度来说，一种是电气来的状态信号DI，一种是控制电气设备的控制信号DO，还有一种是频率信号AO，然后就是看具体的控制方案怎么去做了。根据题意主要对象是电机，相对应的有泵，风机等。因此想实现自动控制，不仅需要组态开关量还要组态模拟量，形成闭合控制回路。其中开关量有开入量和开出量，模拟量有模入和模出量。情况一，简单控制电机只需启停和监视它的运行情况，那么进入DCS的有开出量，模入量。
MHYVP （1×2 1×4 2×2 3×2 4×2 5×2 6×2 8×2 10×2?）×7/0.30、7/0.37、7/0.43、7/0.52聚乙烯绝缘聚氯乙烯护套煤矿用信号电缆，用于电场干扰较大的场所作信号传输，可用于固定敷设。
2.2 电缆型式由系列代号、绝缘、护套材料代号、外护层和性能特征代号5个部分组成。安防工程、监控工程、弱电系统工程、综合布线、银行监控工程、网络工程、消防工程、远程三表抄送、楼宇防盗监控、门禁可视对讲等专用音视频信号电线电缆。
Railway cables are suitable for transmission under rated voltage ac 500V or dc 1000V and below. Product name, model, specification and scope: plastic insulation and polyurethane sheath railway cable PTYAH; PTYA; PZYA; PTYV; PTYY,; PTY22; PTY23; (PZY02; PZY03; PZY23 PZY22) 1/0.8mm (1/1.0mm) 2-48 core is suitable for railway communication, fire alarm, telegraph and other automatic devices with rated voltage ac 500V or dc 1000V or below. Poly (PVC insulation composite sheath steel tape armoured polyvinyl chloride sheathed PTYA23 PTYA22 PTY23 PTY22 PTYAH23 PZYA23 PZYA22 PZY23 PZY22 0.8 mm (1/1.0 mm) 4-61 core is fit for ac rated voltage 500 v or dc voltage 1000 v and below transfer audio and fixed laying railway and group control automation assembly line, can transport railway group general automatic letter, also can transmit the audio frequency shift automatic block and business calls. ? 4, using features: cable in - use under 40 ℃ to + 50 ℃. Cable conductor long-term working temperature shall not exceed 70 ℃. Ordinary sheath of the cable laying under the temperature below 5 ℃, resistance to sheath for - 10 ℃. The bending radius shall not be less than 15 times of the outer diameter of the cable (when laying) and shall be applicable to any horizontal difference
Main transmission cable MHYVP 2 * 2 * 2 * 7/0.52 performance: 1. + 20 ℃ dc resistance wire 7/0.28 or less 45 Ω 1/0.8 / Km 36.7 or less Ω/Km, 2. + 20 ℃ wire insulation resistance 3000 M or more Ω. Km3. The line capacitance (800 ~ 1000 hz) to work or less 0.06 uF/km4. The far end crosstalk attenuation (800 ~ 1000 hz) or 70 dB/km5. Inductance (800 ~ 1000 hz) 800 or less mH/km6 resistance ac power frequency voltage 1.5 KV / 403 to the characteristics of the main transmission cables MHYVP 2 x 2 x 7/0.52 by: Mhy MT8 1/0.8 (20 30 x 2 x 2 x 2) 50 x 0.8 coal mine with insulating aluminum bonding layer of PVC sheathed communication cable used in deviated well and drift MHYV (1 1 x 2 x 2 x 2, 4, 5 x 2) x 7/0.28 coal mine by polyethylene insulated PVC sheathed communication cable for mine roadway inclined lane and electromechanical cavern MHJYV 4/0.28 wire + 3/0.28 steel wire 1 2 x 2 x 2 coal mine with strengthening core polyethylene insulated PVC sheathed mining communications cables used for mechanical damage is higher level and inclined lane MHYA32 (30 x 2, 50 x 2, 80 x 2) x 402 coal mine e introduction mining communication cable: purpose: this product is used for underground telephone communication welding line, distribution line and user line. Conditions of use: cable temperature - 40 ℃ ~ + 50; At 25 ℃ when the humidity is 95%; Cable laying temperature - 10 ℃ or higher; The bending radius of MHYV for cable laying is 10 or greater