Paratherm HE heat transfer

Paratherm HE heat transfer fluid is an economical, highly-refined, mineral-oil based heat transfer fluid formulated for service in closed-loop heat transfer systems to 600°F.

OPERATING RANGEMinimum Startup Temp (300cSt)Maximum Operating Temp

37°F / 3°C	630°F / 332°C

FEATURES

Economical workhorse formulation

High purity NSF HT-1 food grade heat transfer fluid

High flash/boiling points

APPLICATIONS INCLUDE

Asphalt Processing & Storage

Engineered Wood & Building Materials

Oil & Gas Processing

Industrial Drying Processes

Plastics, Polymers & Textiles

Food & Beverage Processing

PRESENTATIONS AVAILABLE

Bulk in Tankwagons and Flexitanks

1000-liter totes

55-gallon (208-liter) drums

5-gallon (20-liter) Poly Pails

LACK OF COLOR DOES MAKE A DIFFERENCE

As shown by its almost water-white appearance, Paratherm HE Heat Transfer Fluid has an extremely low level of impurities. This is the result of the extended processing required to achieve its HT1 Rating-approved for incidental food contact by NSF-which removes the impurities that can catalyze fluid degradation. These impurities (such as aromatics, asphaltenes, and sulfur-bearing compounds) give lesser mineral-oil based fluids a slight to moderate yellow color.

LOW VAPOR PRESSURE EQUALS GREATER STABILITY IN VENTED EXPANSION TANKS

Any vapors that are given off by a heat transfer fluid inside a vented expansion tank will react with air to produce the acids that eventually can cause sludge formation and fluid gelling. The higher the vapor pressure, the more vapor is produced and the greater the rate of oxidation. Paratherm HE Heat Transfer Fluid has a negligible vapor pressure that produces almost no reaction with air in vented expansion tanks.