Phillips 66 Type M Aviation

Type M Aviation Oil
Phillips 66® Type M Aviation Oil is an ashless, non-dispersant, multi-grade
engine oil recommended for use in aircraft piston engines where the operator
prefers a mineral oil-based engine oil that does not contain dispersant additives.
It provides easier starting and oil circulation at low temperatures
compared with single-grade mineral oils, while maintaining high film strength at
high temperatures and under high loads for protection against wear and piston
scuffing.

Type M Aviation Oil typically is used as break-in oil for newly overhauled engines
where all-mineral type oils are recommended. The multi-grade formulation
helps reduce cylinder glazing tendency during break-in. Break-in normally is
accomplished in less than 25 hours of engine operation.

Applications
• Aircraft piston engines where the operator prefers a non-dispersant engine oil
• “Break-in” oil for newly overhauled aircraft engines
Type M Aviation Oil meets the re of:
• SAE Standard J1966
• U.S. Military Specification MIL-L-6082 (obsolete)
QPL approval number: N06L1-20W-50 (Type M)

Features/Benefits
• Easier starting and oil circulation at low temperatures compared with
single-grade oils
• High film strength for protection against wear and piston scuffing, even under
high-load conditions, such as takeoff, and at elevated operating temperatures
• Reduces cylinder glazing tendency during break-in, compared with single
grade oils