The latest version of the Master 880, the Verso, is a unique and versatile machine which can function at the very highest speeds while also offering maximum flexibility in production.
HIGH PERFORMANCE
The polyurethane guides and front bush that support the bar allow extremely high rotation speeds to be reached, guaranteeing a turned product with an excellent surface finish.
EXCELLENT FLEXIBILITY
The snap-in polyurethane guides and other e on the Master Verso allow you to machine a wide range of bar diameters using the same channel, or to switch to another configuration in just a few minutes.
EXCEPTIONAL RIGIDITY
The precision design and build of the Master Verso ensure the very highest levels of torsional and longitudinal rigidity, eliminating all vibration.
CHANGEOVER TIMES
If the machine has to be reconfigured, the time required for the complete operation is as short as 8 minutes, thanks to new software and to the introduction of three systems.
FRONT BUSH
The front bush accurately guides the bar between the feeder and the lathe, eliminating all vibration. The time needed to replace the two half-bushes is less than 30 seconds.
SNAP-IN GUIDES
The round section guide channels are fully closed and lubricated and can be completely replaced without tools in less than 2 minutes. Guides are also guaranteed interchangeable with previous guides.
SELF-CENTERING knives
The knife group that introduces the bar into the fingers is self-centering. Thanks to this, no adjustment is needed by the operator when bar size changes.
MAGAZINE
The magazine is available in three different versions, making the feeder easily adaptable to different product type.
MP
This is a single level magazine with centralised adjustment. Maximum capacity is about 320 mm, e to 5 bars of 60 mm (360 Kg max).
P
This is a magazine with 2-3 removable floors offering a maximum capacity of 1800 mm, e to 72 bars of 25 mm. F This is a bundle type magazine specially designed for large pro