◎无凸轮、无摇臂设计（不但调机速度比传统凸轮机快50%以上，而且生产速度最高快100%以上，定位精准、运行稳定）。
◎拥有传统8工位机械之优点、并兼备1组自由手，可以上下、左右、自由发挥（生产高难度的弹簧，更容易、更快捷、更精准）。
◎全滚动式导轨、长久保持精度。
◎无撞机和发热，复合刀具完成所有工序，刀具损耗低。
◎ 智能模块，自动检测及报警。
◎cam, rocker arm design (not only adjust the machine faster than the traditional cam machine faster 50% of production up to 100% faster speed, precise positioning, stable operation ).
◎has the traditional 8-position mechanical advantages, and the mix of a group of free-hand, can be up and down, left and right, free to play (the production of difficult spring, easier, faster, and more accurate ).
◎full rolling rail, to maintain accuracy for long .
◎Collider complete all the procedures and fever, composite tool, tool wear. ◎intelligent modules, automatic detection and alarm.
技术参数
Specification
型号Model JM-12-600R 伺服电机输入总功率Cam Server Motor 26000w
轴数Axes Count 12轴 工作电源 Voltage 380v
线径Wire Diameter 2.0-6.0mm 工序数据储存量 Program Storage 2000个以上
最大送线指令值Max. Wire Feed 10000.00mm 气压 Air pressure 5-6KG/cm
最小送线指令值Min. Wire Feed 0.01mm 探针Pin 3个
最大送线长度Maximum Feeding Length 无限长 机器尺寸Dimensions 3100x2200x2400mm
最大生产速度Maximum Manufacture Speed 80m/分钟 机器重量 Machine Weight 5000kg