Fire hydrant, landing fire hydrant, indoor fire hydrant under UL codes
Certifed globally
We make different styles of indoor hydrant, landing hydrant, underground hydrant,etc.
1. Item: SNJ 65
2. Type:SN50,SN65
3. Strength test pressure:2.4mpa
4. The indoor fire hydrant is a fixed indoor fire-fighting e in factories, public buildings, warehouse,etc.
Indoor fire hydrant is the connecter in the water piping network, including one valve with single outlet, One Valve with double outlet and double valve with double outlet etc. It's used to offer assistance to control the fire.
Rated working pressure:16 Bar
Strength test pressure:24Bar
A hose is attached to the fire hydrant, then the valve is opened to provide a powerful flow of water, on the order of 350 kPa (50 lbf/in²) (this pressure varies according to region and depends on various factors including the size and location of the attached water main). This hose can be further attached to a fire engine, which can then use a powerful pump to boost the water pressure and possibly split it into multiple streams. The hose may be connected with a threaded connection, instantaneous "quick" connector or a Storz connector. Care should be taken not to open or close a fire hydrant too , as this can create a water hammer which can damage nearby pipes and e. The water inside a charged hoseline causes it to be very heavy and high water pressure causes it to be stiff and unable to make a tight turn while pressurized.