ROS-2D拉姆齐跑偏开关
山银机械专业生产销售ROS-2D拉姆齐跑偏开关,多年生产研发经验,技术力量雄厚,质量保证销售热线:
R0S-2D防偏开关可固定在输送机纵梁的顶部或底部，动作臂距皮带边缘大约25到75mm。通常安装在皮带两侧距头部或尾部滚筒0.3到2米的地方。
皮带跑偏后，迫使动作臂偏离，触动DPDT报警微动开关。如果继续偏停到停机触点，触动另一组触点，输送机就会保护性停机。
设备描述
通用的安装设计可使防偏开关随意安装在输送机纵梁顶部或底部
坚固的铸铝外壳，防护标准NEMA4，特殊的环境可选特殊的表面处理
整体式盖板易于接线及调整
不需拆除动作杆就可拆掉盖板
动作杆轴承额定转速5000转/分，适合于皮带速度小于6.35米/秒
动作杆法向角调节范围为22.5°
法向夹角为10°时报警触点动作，法向夹角为20°时停机触点动作
应用范围
规皮带输送机
地下、索道支撑皮带输送机
轮船装卸系统
堆垛/取料输送机
倾斜和梭式输送机
起重机/挖掘机起重臂限位
裙边给料机/输送机
重型极限开关
Ramsey（原“美国拉姆齐”） 皮带机拉线防护器
Thermo Fisher Scientific offers a variety of components for monitoring conveyors and other bulk material handling e, including the Ramsey Pro-Line Safety Cable Pull Switch. These devices monitor operating processes for potentially hazardous conditions and activate an alarm when they occur. This helps to keep your personnel safe, your e from being damaged, your time from being wasted, and your profits from becoming losses.
For Emergency or Normal Shut-Off
A safety pull cable is attached to the actuating arm of the Ramsey Safety Cable Pull Switch and terminated at fixed mounts at either end of a conveyor. Force applied to the pull cable at any position causes the actuating arm to move into a tripped-locked position and activates an alarm from one DPDT or two SPDT micro-switches, alerting e circuits of the stop condition. This will stay locked until manually reset by the reset lever.
Options
Universal mounting plate
Secondary flag alarm
Complete hook-up accessories including: cable, clamps, standoffs, lights
NEMA 4 and NEMA 9 Alarm