Standard hysteresis brakes is divided into single output and double output, we can use the type of installation according to the usage space,its range of application is wide and the commonality is strong .It is mainly used in high speed winding e, motor, a small internal combustion engines,gear boxes and other rotary devices .load –life test simulation; high-end sports e,accurate load.
Air-cooled Hysteresis Brakes- Take the standard hysteresis brake as the foundation added the air cooled installed thereon. When brake is under operation for a long time, its temperature will rise suddenly, the air cooled hysteresis brake can be continuous working for a long time under a high slip power.
Matched hysteresis brakes- The certain point in a number of torques are the same with only one set of control system to achieve multi-axis tension control.
It is mainly used for multi-volume yarn,glass fiber unwinding devices and cables ,ropes, and other processing machinery.
Hollow shaft Hysteresis brakes- Take the standard hysteresis brakes as the foundation getting rid of the bearings and adding fix holes in the rotor .Providing constant tension control for the passively unreeling wire, it applied to the screw winding occasions where the electric cable inhibitor grips the gauze to the belt. Such as wire and cable, fiber optic cables ropes and tape and other production e.
Note:
1. All specifications may choose single or double output shaft.
2. Most of the specifications can be customized for non-standard rated voltage.
3. Rated slip power refers to the particular coil as well as the maimum temperature of shaft bearings reaching 90ºC wing to the impact of the fixed pattern,ventilation,ambient temperature and other conditions,the actual value while working may change for nearly 50%.
USES