小汤售PM2813*PM2813可编程电源*宏鑫电子
宏鑫电子仪器有限公司
联系人：曾先生：
汤小姐：
24小时在线号码：
：
淘宝网：huali
E-mial：tosstar118@163
直线：
传真：
网站∶地址:东莞市塘厦镇林村新阳路中2号
(如网络分析仪,频谱分析仪，信号源,无线电综合测试仪，仪用电源，示波器，
蓝牙测试仪，功率计，频率计，万用表等高频仪器,并承接仪器维修)!
欢迎来电!上门看货!价格好商量!您的满意是我们的追求。
（若找不到联系方式请百度“东莞市宏鑫电子仪器汤雪”)
30V-10A-60W Output Module Specification
Autoranging Power Supplies PM2811, PM2812 and PM2813 Range Output Voltage: 0 to 30V
Output Current: 0 to 10A
Output Power: 60W
Overvoltage protection: 2 to 32V
Accuracy (at calibration temperature)
Output Voltage: ± (0.04% of setting + 10 mV)
Output Current: ± (0.1% of setting + 50 mA)
Over Voltage Protection: ± (0.5 % of setting + 150 mV)
Temperature coefficient Output Voltage: (0.016% of setting + 2 mV) /K
Output Current: (0.05% of setting + 2 mA) /K
Long term drift (in an 8 hour period)
Output Voltage: 0.04% of setting + 5 mV
Output Current: 0.05% of setting + 10 mA
Programming Resolution (12 bit)
Output Voltage: 7.5 mV/LSB)
Output Current: 2.5 mA/LSB)
Over Voltage Protection: 7.5 mV/LSB)
Source Effect (for any line voltage change within rating)
Voltage: ± (0.01% of setting + 2 mV)
Current: ± (0.02% of setting + 2 mA)
Load Effect (load change 10% to 90% or 90% to 10% full load)
Constant Voltage: ± (0.01% of setting + 5 mV)
Constant Current: ± (0.02% of setting + 5 mA)
Load cross regulation Negligible for both voltage and current
Output Noise (PARD) Constant Voltage pp/rms (40 Hz to 30 MHz): 15 mV/3 mV
Constant Current rms: 10 mA
Switching Frequency: approx. 20 kHz
30v-10a-60w输出模块规范
自动调节电源pm2811，pm2812和pm2813范围输出电压：0～30V
输出电流：0～10A
输出功率：60W
过压保护：2～32V
精度（在校准温度）
输出电压：±（设置+ 10 mV 0.04%）
输出电流：±（设置+ 50马0.1%）
过电压保护