威海豪跃自动化专业生产双液灌胶机，真空灌胶机，点胶阀

1：采用不受材料液体粘度变化影响的容积计量式钢性载入泵，可进行稳定高精度的计量吐出。

The device uses a rigid load metering pump,using the volume measurement method.Measurement accuracy will not be the glue viscosity changes in the process and ensures accurate and spit accuracy.

2：当胶水含有较硬的填料时，必须采用耐磨泵，而且泵部整体竖直放置，使硬质填料不易沉积，使用维护更加方便，保证长期使用不影响吐出精度及比率。

We must use wear-resisting pump when the glue have a lot of hard additives. And the pump integrated vertically, so the hard packing is not easy to deposit, to ensure the long-term use does not affect the precision and the rate of spit.

3：选用动态混合时，采用新型混合器，多层搅拌桨强制混合，保证混合均匀。

The dynamic hybrid, using a new type of mixer, multiple impellers forced mixing, ensure uniform mixing.

4：选用伺服驱动时，吐出量精度更高，而且吐出量和吐出速度可由触摸屏直接设定，更适合多品种工件的高精度吐出，并预留信号接口，可与机械手等自动化设备直接连接。

The servo drive, discharge amount of higher accuracy, and discharge amount and spit out the speed can be set by the touch screen directly, high precision and is more suitable for many varieties of workpiece, and reserve signal interface, can be directly connected with a mechanical hand and other automation e

5：整体设备设计紧凑，使用操作简单方便。

The whole e has the advantages of compact design, simple operation.

1：小型，轻量化设计，可手持使用，更适合用于自动化机械的紧密安装，不漏液，不滴胶。

It was designed very small and very light.It can be used by hand,more Suitable for compact automated machinery, no leakage, no glue.

2：分解，维护简单方便。

Decomposition, maintenance is simple and convenient.

3：采用日本先进技术研发制造，适合于不同的吐出量范围，部分具有回吸功能，更能保证胶水不外漏。

Developed by Japan's advanced technology research and manufacture, suitable for different spit volume range, some of the back suction function, but also to ensure that the glue is nothing more than leakage.

4.适用材料（Applied materials）:

单液型或双液型环氧树脂，聚氨酯，硅胶等。

Single liquid type or double liquid epoxy resin,polyurethane,silicone etc.