井用潜水泵

Basic Info

          Model NO.: 6", 8", 10"12"

·         Max. Capacity: >400 L/min

·         Impeller Number: Multistage Pump

·         Position of Pump Shaft: Vertical Pump

·         Trademark: CP-PUMP

·         Origin: Xingtai City Hebei Province, China

·         Max. Head: >150m

·         Driving Type: Motor

·         Influent Type of Impeller: Single Suction Pump

·         Pump Casing Combined: Vertical joint Surface Pump

·         Transport Package: Wood Case

·         HS Code: 8413709990

          Product Description

          Application

QJ series deep well submersible pump consists of the electrical machinery and the pump body. It is widely used it hydraulic engineering facility, for example irrigation on farmland , draining water in industry and mining enterprise: architectural engineering precipitation ,also in cooling system of river, reservoir, eruptive fountain, hot spring bathing place: and so on. .It's main characteristic is that the combination of pump and electrical machinery, working in the deep water, easy to use, repairs, with great efficiency, also safe and reliable.

Operate Condition
1.power source:380v,3ph,50hz
2.water
(1)not above 25oC(85oC for the type of heat-resisting)
(2)shot contents(mass ratio) not above 0.01%
(3)PH 6.5-8.5
(4)content of hydrogen sulfide not above1.5mg/L
(5)chloride ion not above 400mg/L
3.the water pump must be fully filled with clean water is used in water completely.
4.the install depth can not exceed the fixed lift 20%;abd require the wall of the well smooth and straight.

1.We are factory direct sales, our products have the lowest price.

We are factory direct sales, we can guarantee product

We are factory direct sales, we can guarantee that the most professional products to explain

2. In the country within our product technology in a leading position.

(1)Introduction of Lost-Foam casting(named as Expendable Casting Process, EPC).

First, a pattern is made from polystyrene foam, which can be done by many different ways. For small volume runs the pattern can be hand cut or machined from a solid block of foam. Next, the foam cluster is coated with ceramic investment., also known as the refractory coating, via dipping, brushing, spraying or flow coating. Secondly it controls permeability, which allows the gas created by the vaporized foam pattern to escape through the coating and into the sand. Finally, it forms a barrier so that molten metal does not penetrate or cause sand erosion during pouring. This casting process is advantageous for very complex castings that would require cores.

Casting is highly accurate

Design flexibility

There is no traditional castings in the sand core

Clean production of green

(2) The use of water lubrication technology to prevent leakage of water pollution

Our factory has passed ISO9001:2008 international management system certification .We have full set control system and testing system to guarantee best product

Just let me know your detailed inquiry about our submersible pump, then we can execute deliveries of our products with fastest and in safest mode, and provide you best service to meet your re

Packaging detail:

(1) Wooden case

(2) Can be packed as per customer re

(3) Usually can load 10-20 pieces into one 40HC container

Delivery time: within 15-30 working days

Please search "CNSTARCK or PRIME " from Google for more information.