厂家直销火凤皇圆线方线异形线对焊机 扁线碰焊机

 

东莞市火凤皇自动焊接机械有限公司直销，欢迎您的来电！

Dongguan City Fire Fenghuang Welding Machinery Co., Ltd. Direct sales hotline: , you're welcome!

 

      本机采用纯正台湾技术制造，工件夹紧机构采用杠杆式，焊机主要气动元件采用日本进口，导向装置采用干式轴承和镀铬杆，焊接时气缸动作灵活，焊接飞溅小，使用方便，性能稳定，控制系统可满足客户随意调节，并可连续作业，是铁线制品行业最理想的焊接设备之一。变压器采用进口硅钢片，功率输出强劲，使用寿命长，故障率极低。

       The machine adopts Taiwan technology to produce pure, workpiece clamping mechanism using leveraged, welder main pneumatic components imported from Japan, the guide device uses dry-bearing and chrome-plated rod cylinder moves flexible welding, weld spatter is small, easy to use, stable performance the control system can be adjusted to meet the customers, and continuous operation, is one of the welding e wire products industry is the best. Imported silicon steel transformers, power output strong, long life, low failure rate.

 

      工作原理：利用电流通过电极焊接工件时产生的电阻热熔化母材金属。同时使用垂夹直紧压力，附加横向推力。冷却后在母材金属之间形成焊点。顾名思意，此种焊接方法是电与力的结合。

         How it works:the use of hot melt base metal resistance generated by the current through the electrode welding work. Use clips straight vertical tight pressure, additional lateral thrust. After cooling, the base metal is formed between the solder joints. The name implies, this welding method is a combination of electricity and power.

 

 

产品适用范围：Products Scope:

广泛应用于铁线制品、五金灯饰、铁管家私、汽车工业、小家电、小五金等行业。

Widely used in wire products, metal lighting, iron pipe furniture, automotive, small appliances, hardware and other industries.

 

产品的性能与特点：Product performance and features:

1、利用电流通过电极间焊接工件时产生的电阻热熔化母材金属，同时使用垂直夹紧压力，附加横向推力，冷却后在母材金属之间形成焊点。

2、采用纯正台湾技术制造，工件夹紧机构采用杠杆式，气动元件采用日本黑田精工电磁阀、空气过滤器等，导向轴采用镀铬杆，气缸动作灵活，焊接飞溅小，使用方便，性能稳定。

3、控制系统可满足客户随意调节，并可连续作业，是铁线制品行业最理想的焊接设备之一。

1, the resistance of the base metal melt produced when using a current between the electrodes by welding work, while using a vertical clamping pressure, additional lateral thrust, after cooling is formed between the base metal pads.
2, the use of pure Taiwanese technology manufacturing, the workpiece clamping mechanism uses a lever, pneumatic components adopt Japan Kuroda Seiko solenoid valves, air filters, etc., the guide shaft chrome rod cylinder moves flexible, welding spatter small, easy to use, stable performance .
3, the control system can be adjusted to meet the customers, and continuous operation, is one of the welding e wire products industry is the best.

 

技术参数：Technical Parameters:

型号Model	电源电压voltage	额定功率rated power	暂载率Duty rates	次级空暂电压Secondary empty temporary voltage	最大夹持力The maximum clamping force（Kgf）	最大顶锻力Maximum forging force（Kgf）	额定焊接能力（铁线）Rated welding capability (wire)	备注Remark
HFH-QD-35G	380V2N50Hz	35KVA	25%	4-5V	450	250	Ф8+8mm	气动Pneumatic
HFH-QD-50G	380V2N50Hz	50KVA	25%	5-6V	500	250	Ф9+9mm	气动Pneumatic
HFH-QD-60G	380V2N50Hz	60KVA	25%	8-9V	600	350	Ф10+10mm	气动通水Pneumatic pass water
HFH-QD-80G	380V2N50Hz	80KVA	25%	9-10V	650	400	Ф11+11mm	气动通水Pneumatic pass water
HFH-QD-100G	380V2N50Hz	100KVA	25%	10-11 V	700	450	Ф12+12mm	气动通水Pneumatic pass water
HFH-QD-150G	380V2N50Hz	150KVA	25%	11-12 V	750	500	Ф13+13mm	气动通水Pneumatic pass water

可根据客户工艺要求定制专用焊机。

It can be customized according to customer special welding process.

 

杠杆式对焊机整机实拍图

Leveraged welder machine really making plans

 

 

 

双加压气缸Double pressurized cylinder

 

气源处理器Gas source processor

 

横向加压气缸与气量调节阀Lateral pressure cylinder and the gas valve

 

对焊机全数字控制器Welder digital controller

 

对焊工件夹紧铜头Copper for welders clamping head

 

夹紧加压连杆Clamping pressure link







横向与竖向加压气压调节阀

Horizontal and vertical pressurized gas pressure regulator valve

 

控制箱避振橡胶垫，防止控制箱因强振动产生故障。

Control box anti-vibration rubber pads prevent control box fault due to strong vibration.

品牌火凤皇型号DN-Q35电流交流作用对象金属焊接原理对焊驱动形式气动产品别名HFH火凤皇气动对焊机用途焊接作用原理对焊电机功率35KVA是否提供加工定制是