高精密汽车轮毂修复机床制造商， 泰安海数机械制造有限公司,苏总：，山东省泰安市岱岳区山口工业园，//www.htskcnc.com/。于是重新换刀一次来观察一下，结果发现：果然挡块未运动到位。于是把挡块螺栓拧紧， 试换刀一次正常。再换一次刀，原故障又出现了，同时发现蜗杆端的轴套打滑并且爬升现象。难道是它造成了电机反转锁紧时位置开关的挡块不到位，于是把该轴套 进行了轴向定位处理，将刀架顶盖装好。结果刀架锁紧正常了。1.数控转塔冲床采用电脑NC控制系统,更具人性化的设计.适合各种金属片之送料及矫正。
2. 数控转塔冲床适合于各种五金、电子、电器、玩具及汽车零件之连续冲压加工，送料矫正，准确耐用。
3. 数控转塔冲床全采用进口日制伺服马达、电器箱电子零件及控制器等,产品故障率低，寿命长。
4、数控转塔冲床精度高，非常耐用。 The choice of CNC system function should be based on practical, not necessarily too much, especially in the mass production line of e, the more simple the better, for more variety, small batch production machine tools to strengthen the programming function of choice, such as Random programming (background programming), motion graphics display, man-machine dialogue programming (gps), macro programming, etc., although the program can speed up the preparation, but the cost should be increased accordingly. Another configuration is to simplify the configuration of numerical control system programming functions, separate configuration of the automatic programming machine and CNC system with the communication interface, the program processing are done in the programming machine to complete the task in advance, and then spend a few minutes, into the numerical control system , To do so can further improve the machine operating rate.
In the improvement of processing and reliability of work has also developed a number of accessories, such as automatic measuring devices, contact probe and the corresponding measurement software, tool length and wear detection, machine tool thermal deformation compensation software accessories, these attachment selection principle is required to work Reliable, not one-sided pursuit of novelty. For some ancillary functions, such as cooling, protection and chip removal devices mainly based on future use in the field re and process re, for example, consider the future re of large margin cast iron, you have to use high-sealed protective cover, large Flow shower cooling, paper coolant filter devices. In short, to select and adapt to the production capacity of accessories.