KCD2-SR-Ex1.LB安全栅

KCD2-SR-Ex1.LB安全栅，单通道/一进两出，适用于传感器，接近开关等。

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

• Dry contact or NAMUR inputs

• Usable as signal splitter (1 input and 2 outputs)

• Relay contact output

• Fault relay contact output

• Line fault detection (LFD)

• Housing width 12.5 mm

• Up to SIL2 acc. to IEC 61508

Function

This isolated barrier is used for intrinsic safety applications. It

transfers digital signals (NAMUR sensors/mechanical

contacts) from a hazardous area to a safe area.

The proximity sensor or switch controls a form A normally

open relay contact for the safe area load. The normal output

state can be reversed using switch S1. Switch S2 allows

output II to be switched between a signal output and an error

message output. Switch S3 enables or disables line fault

detection of the field circuit.

During an error condition, relays revert to their de-energized

state and LEDs indicate the fault according to NAMUR NE44.

A unique collective error messaging feature is available when

used with the Power Rail system.

Due to its compact housing design and low heat dissipation,

this device is useful for detecting positions, end stops, and

switching states in space-critical applications.

常备型号：

KCD2-STC-EX1，KCD0-SD-EX1.1245，KCD2-SCD-EX1，KCD2-SR-EX1.LB，KCD2-SR-EX2

KCD2-UT2-EX1，KCD2-STC-1，KCD2-SR-1.LB

KFD2-STC4-EX1,KFD2-STC4-EX1.2O,KFD2-STC4-EX2,KFD2-STC4-1.2O

KFD2-SR2-EX1.W,KFD2-SR2-EX2.W,KFD2-SR2-EX1.W.LB

KFD2-SCD2-EX1.LK,KFD2-SCD-EX2.LK,KFD2-SL2-EX2

KFD2-UT2-EX1,KFD2-UT2-EX2

KFD2-UFC-1.D,KFD2-UFC-EX1.D

KFD2-VR4-EX1.26,KFD2-VR2-EX1.50m,KFD2-VR-EX1.18

KFD2-RR-EX1