KOLLMORGEN科尔摩根KBM无框力矩电机介绍

特征完全封装的定子绕组 155°C内部绕组温度连续能力 PTC热敏电阻（雪崩型）过载保护稀土钕铁硼磁铁转子磁铁上的故障安全带符合RoHS标准 UL和CE机构促进优化包括转子轮毂尺寸，堆叠长度，直径，安装特征，绕组，绝缘，连接类型等等可选的闭锁数字霍尔效应传感器预先对准并在工厂安装，增加了轴向转子长度，以实现正确的触发

优点

直接负载连接消除了齿轮箱，皮带或皮带轮的维护零间隙和合规性可提供更高响应的系统性能消除耦合设备，减少整体机器尺寸嵌入式电机实现紧凑的机器设计，有助于保护您的知识产权大量精选标准电机和共同设计的修改，精确配合，无需时间，费用和完全定制电机的风险

KBM(S) frames	Outside Diameter	Through Bore	Continuous Stall Torque	Peak Stall Torque	Continuous Output KW
"Servo" Form Factor
KBM(S)-10	59.96 mm (2.95 in)	16.01 mm (.63 in)	.49 - 1.45 Nm	1.17 - 4.91 Nm	0.9 - 3.0 KW
KBM(S)-14	74.9 6mm (2.95 in)	20.01 mm (.79 in)	1.22 - 2.92 Nm	3.28 - 10.50 Nm	0.9 - 3.0 KW
KBM(S)-17	84.96 mm (3.34 in)	30.01 mm (1.18 in)	2.06 - 6.20 Nm	5.95 - 24.00 Nm	0.9 - 3.0 KW
KBM(S)-25	109.96 mm (4.33 in)	50.01 mm (1.97 in)	4.85 - 11.1 Nm	14.4 - 54.8 Nm	0.9 - 3.0 KW
KBM(S)-35	139.96 mm (5.51 in)	65.01 mm (2.56 in)	12.4 - 25.9 Nm	40.8 - 93.0 Nm	0.9 - 3.0 KW
KBM(S)-45	189.96 mm (7.48 in)	85.02 mm (3.35 in)	29.7 - 54.6 Nm	Nm	0.9 - 3.0 KW
"Torquer" Form Factor
KBM(S)-43	159.78 mm (6.29 in)	76.28 mm (3.00 in)	6.11 - 44.2 Nm	18.0 - 153 Nm	0.9 - 3.0 KW
KBM(S)-57	202.90 mm (7.99 in)	104.17 mm (4.10 in)	18.8 - 109 Nm	60 - 441 Nm	0.9 - 3.0 KW
KBM(S)-60	229.85 mm (9.05 in)	105.05 mm (4.14 in)	29.4 - 154 Nm	69.1 - 393 Nm	8.4 - 20.1 KW
KBM(S)-79	259.63 mm (10.22 in)	152.43 mm (6.00 in)	43.5 - 222 Nm	Nm	8.4 - 20.1 KW
KBM(S)-88	331.46 mm (13.05 in)	155.01 mm (6.10 in)	Nm	Nm	8.4 - 20.1 KW
KBM(S)-118	361.11 mm (14.22 in)	225.04 mm (8.86 in)	Nm	Nm	8.4 - 20.1 KW
KBM(S)-163	605.0 mm (23.82 in)	315.50 mm (12.42 in)	Nm	Nm	8.4 - 20.1 KW
KBM(S)-260	850.0 mm (33.46 in)	557.85 mm (21.96 in)	Nm	Nm	8.4 - 20.1 KW

KOLLMORGEN科尔摩根KBM无框力矩电机介绍

北京卓誉科技有限公司