TL-80小型玻璃钢脱硫塔@维修玻璃钢脱硫塔@玻璃钢脱硫塔价格
一、产品介绍
脱硫塔是对工业废气进行脱硫处理的塔式设备。脱硫塔起初以花岗岩砌筑的应用的最为广泛，其利用水膜脱硫除尘原理，名花岗岩水膜脱硫除尘器，或名麻石水膜脱硫除尘器。现如今随着环保形势的发展，玻璃钢脱硫塔应用更加广泛。
二、产品工作原理
SO2吸收净化过程，处理的是低浓度SO2烟气，烟气量相当可观，要求瞬间内连续不断地高效净化烟气。因而，SO2参加的化学反应应为极快反应，它们的膜内转化系数值较大，反应在膜内发生，因此选用气相为连续相、湍流程度高、相界面较大的吸收塔作为脱硫塔和脱硫除尘器比较合适。通常，喷淋塔、填料塔、喷雾塔、板式塔、文丘里吸收塔等能满足这些要求。其中，喷淋塔是使用最为广泛的脱硫塔类型之一，喷淋塔具有结构简单，工艺成熟可靠的优点，广泛应用于大型电厂，中小型低硫烟气治理；对于高硫烟气治理，有色行业以气动乳化脱硫塔、多层喷淋塔等为主。
The process of SO2 absorption and purification deals with low concentration SO2 flue gas. The amount of flue gas is considerable, which requires continuous and efficient purification of flue gas in an instant. Therefore, the chemical reaction of SO2 should be very fast. The conversion coefficient of SO2 in the membrane is high, and the reaction takes place in the membrane. Therefore, it is appropriate to select the absorption tower with continuous gas phase, high turbulence degree and large phase interface as the desulfurization tower and desulfurization dust collector. Usually, spray tower, packing tower, spray tower, plate tower and Venturi absorber can meet these re Among them, spray tower is one of the most widely used desulfurization tower types. Spray tower has the advantages of simple structure, mature and reliable technology, which is widely used in large power plants, small and medium-sized low-sulfur flue gas treatment; for high-sulfur flue gas treatment, the non-ferrous industry mainly uses pneumatic emulsification desulfurization tower, multi-layer spray tower and so on.
三、产品参数
|
项目
|
脱硫效率（%）
|
除尘效率（%）
|
处理烟气量（m³/h）
|
设备阻力（Pa）
|
入口温度（℃）
|
使用寿命（年）
|
|
指标
|
≥85
|
≥95
|
3000-6000
|
＜1000
|
＜300
|
≥8
|