蓄电池MX12800友联12V80AH价格
友联MX系列阀控密封铅酸蓄电池
1、友联阀控密封铅酸铅蓄电池性能
1.1 放 电 特 性
1. 友联蓄电池的容量与放电电流关系
铅蓄电池的容量受放电电流的直接影响。电流越大，电池的利用率越低，其实际放出电量减少，典型的放电曲线示于图1。不同放电倍率下电池的实际容量大致如下(表中C为10小时率容量)：
放电电流（A） 0.1C 0.6C 1C 3C
实际容量（AH） 1C 0.6C 0.5C 0.35C
1.2 充 电 特 性
密封铅蓄电池一般采用恒压限 流充电方法。充电开始时电池内阻小，恒电流输入的电量全部用于电极电化学反应.随充电的进行，电池电压逐渐升高，当电压升至规定恒电压时，充电电流将逐渐减小，而充电电压保持不变.此时部分电量用于建立氧气在负极的吸收和水的循环利用。
友联蓄电池精品充电放电：Fast charging method
Youlian impulse type battery charging method, this method not only follow the battery charged inherent acceptance rate, and can increase the rate of battery charging to accept, to break the limitation of the battery charged index accept curve, this also is the new development of the theory of battery charging. Pulse charging ways, first is to use pulse current for the battery, and then let the battery at a period of time, such a cycle, as shown in figure 5. Pulse charging the battery is full of power, and break the battery by the chemical reaction of oxygen and hydrogen combined by absorbing the have time to make the concentration polarization and ohm polarization naturally get eliminated, thus reduce the battery internal pressure, make the next round of constant-current charging can more smoothly, the battery can absorb much more power. Intermittent pulse makes the response time of the battery is full, reduced the gas analysis, improved the battery charging current acceptance rate.
(2) 2 reflextm fast charging method, this technology is a patented technology in the United States, it is main face of charging object nickel cadmium battery. Because it USES a new kind of charging method, solves the nickel cadmium battery memory effect, therefore, greatly reduces the storageuick charging time. Lead-acid battery charging method and the detection method for charging status and nickel-cadmium batteries are very different, but they may borrow REFLEXTM charging method of a pulse cycle including positive charge, reverse instantaneous discharge pulse, at three stages.