fastener 圣霖国际【以人为本】

深缝：锯削深缝时即当锯缝的深度超过锯弓高度时，高度时，fastener，锯弓就会与工具相碰，无法继续锯削；此时应将锯条拆出，将锯条转90。

Deep seam: when sawing deep seams， when the depth of the sawblade exceeds the height of the saw bow，fastener价格， when the height is high，fastener生产商， the saw bow is touched by the tool and can not continue to be sawed; the saw strip should be removed and the saw blade is turned 90.

将闭合的模具放置于雎力机工作台或垫板上适当位置，如果使用气垫，先要放好顶杆，并标记好模具的摆放位置。

手动扳动冲压机床飞轮（或操纵点动按钮），使机床上滑块下行并停于下死点位置。

Place the closed mould on the bench or pad of the mandrel machine. If the air cushion is used， the ejector pin should be placed first and the placement of the mould should be marked.

Manually pull the flywheel of the stamping machine (or the moving button)， so that the slider on the machine tool will be downhill and stop at the bottom dead center.

五金冲压件材料的硬度检测，fastener生产厂，其主要目的就是确定购入的金属板材退火程度是否适于随后将要进行的冲压件加工，不同种类的冲压件加工工艺，需要不同硬度级别的板材。

stamping material hardness testing， the main is to determine whether the purchase of metal sheet annealing is suitable for subsequent stamping parts processing， different types of stamping processing technology， the need for different hardness levels of the plate.

fastener-圣霖国际【以人为本】由鞍山市圣霖进出口贸易有限公司提供。fastener-圣霖国际【以人为本】是鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）今年全新升级推出的，以上图片仅供参考，请您拨打本页面或图片上的联系，索取联系人：王秋。