POWERCELL蓄电池PCV200AH安防系统
POWERCELL蓄电池PCV200AH安防系统
POWERCELL蓄电池PCV200AH安防系统
英国POWERCELL电池公司为一家欧洲从事工业电池已经有50多年的制造商，在马耳他，卢森堡，爱尔兰和瑞典均设有办事机构。对不同工业领域的能源问题，我们可以迅捷地提供建议、确认及寻找新的解决方案。我们紧跟电池行业的发展，且永远能找到新的可能性。在欧洲电池能源领域，我们是好的电池制造商。
A, circulating usage patterns
1, if the device is connected to the power supply, leave the power supply by the battery after charging saturation, this kind of circumstance should choose circulation charge and discharge.
2, when charging machine provided by a charging circuit voltage should be * * limitations: the environment temperature at 25 ℃, 2 V battery charging charging - as follows: 2.35 to 2.45 V. Battery charging voltage is 4 V: 4.70-4.90 V. Charging voltage of 6 V battery are as follows: 7.05 to 7.35 V. 8 V battery charging voltage: 9.40 V to 9.80 V; 10 V battery charging voltage as follows: 11.75 to 12.25 V. The 12 V battery charging voltage is: 14.1-14.7 V. Charge current is not more than 25% of the rated capacity values * * A.
3, charging saturation should immediately stop charging, or the battery will be damaged or caused by excessive charging can easily drums outside the cell.
4, charge and discharge, battery not upside down.
5, recycled life depends on the depth of each discharge, discharge the depth, the greater the battery cycle the less the number of times.
Second, the floating usage patterns
1, if the device is always connected to the power supply, and in charging status, just outside the power to stop when the battery power supply, this kind of circumstance should select float charge mode.
Section 2, the battery pack each float charge voltage setting range should strictly control: in 20 ℃ environment, float charging pressure of 2 V battery are as follows: 2.25-2.30 V, * * charging current is not more than 25% of the rated capacity values A.
3, the service life of the floating was mainly affected by float charging pressure and ambient temperature, float charging voltage is higher, the battery life is short.
Third, discharge
When discharge voltage of the battery under provisions of the termination voltage or many times over discharge, over discharge will bring battery severely damaged, make the battery life of early termination.
UPS power supply and maintenance-free lead-acid battery according to the GB/T control valve sealing type lead-acid battery standard design and manufacture, products without adding water before use, the user can use with correct installation. Battery has no acid leakage, small resistance, shock resistance, resistance to discharge recovery capability is strong, small self-discharge, long service life, etc.