目前不少国内高温电线电缆企业纷纷进军国外市场，但是与国外本土产品相比，我国高温电线电缆产品的竞争力还有待提高，尤其是一些企业不了解国外的行业标准就贸然行动，导致企业发展处于一个尴尬的境地。我国作为高温电线电缆行业的知名品牌，已在国外市场取得一定的成绩，下面就分享一下出口高温电线电缆需注意的五个方面。
二、铺设条件：在西亚、东南亚等地区的环境条件比较特殊，如有些地区极端高温度50℃，高日平均温度40℃，因此技术资料中应在意与环境有关的技术参数的说明（如载流量的修正系数）。
四、高温电线电缆的包装：对出口高温电线电缆而言，交货盘一般采用大盘或钢盘结构，并且用铁皮或木条全封闭包装。除了要考虑高温线装盘长度和小允许弯曲半径以外，还要考虑集装箱的尺寸。要严格按照订货要求。由于出口高温线的包装要比国内的繁复，因此会影响到高温线的成本及交货期，为此，在订合同时就要注意。
五、其他注意事项：在发货之前，要向用户提供高温电线电缆主要技术参数、截面图、敷设说明书等资料、试验报告也要随货发运。技术资料应确保完整无缺；要严格控制高温电线电缆的制造长度，交货长度误差要尽量减少。凡是出口产品都要通过国家商检部门检验，并出具商品检验书。
随着世界经济一体化进程的加快，国产高温电线电缆企业的市场竞争必定不会局限在国内市场，国外市场才是更大的舞台。希望国内企业在进军国外市场之前可以仔细思考以上五点，并结合企业自身状况作出适合自己的发展方案。
At present, many domestic high-temperature wire and cable companies have entered the foreign market one after another, but compared with foreign domestic products, the competitiveness of China's high-temperature wire and cable products needs to be improved, especially when some enterprises do not understand foreign industry standards and rashly move, leading to enterprise development. In an awkward situation. As a well-known brand in the high-temperature wire and cable industry, Chuncao has achieved certain results in foreign markets. Here are five aspects to be noted for exporting high-temperature wires and cables.
First, the technical standards: foreign high-temperature wire and cable generally require the use of IEC or British standard, American standard and other advanced standards, so it is not enough to be familiar with domestic standards, but also familiar with international standards.
2. Laying conditions: The environmental conditions in West Asia, Southeast Asia and other regions are quite special. For example, in some areas, the extreme maximum temperature is 50 °C, and the highest daily average temperature is 40 °C. Therefore, the technical data should be concerned with the description of the technical parameters related to the environment (such as Correction factor of flow).
3. High-temperature wire and cable structure: Due to the high-temperature wire and cable laying environment, in addition to meeting the standard re, the high-temperature wire structure often has some additional re. Therefore, enterprises should pay attention to the design and manufacture process of high-temperature wires.
Fourth, the packaging of high-temperature wire and cable: For the export of high-temperature wire and cable, the delivery tray is generally a large disk or steel plate structure, and is completely enclosed with iron or wood strips. In addition to considering the high temperature wire loading length and the minimum allowable bending radius, the size of the container should also be cons