- 发布
- 北京恒泰正宇科技有限公司
- 品牌
- POWER SONIC蓄电池
- 型号
- PS-12100
- 容量
- 12V10AH
- 起订
- 1只
- 供应
- 500只
- 发货
- 3天内
- 电话
- 15810034631
- 手机
- 15810034631
- 发布时间
- 2024-02-23 10:52:17
Power-Sonic一直是主导力量在全球电池业务超过46年。由于我们的承诺我们公司蓬勃发展提供高质量的成本有效的电池,支持水平的服务是首屈一指的。
我们骄傲我们的灵活性和能力迅速采取行动为市场带来新的行业领先产品。我们很自豪持有ISO 9001认证覆盖我们的组织的各个方面。
How long will my battery last?
The lifespan of a battery will vary considerably with how it is used, how it is maintained and charged, temperature, and other factors.
How to connect a battery in Series?
The positive terminal of the first battery is connected to the negative terminal of the second battery, the positive terminal of the second is connected to the negative of the third, etc. The voltage of the assembled battery is the sum of the battery voltages of the individual batteries. So the batteries are connected: + to - to + to - to + to -, etc. The capacity of the battery is unchanged.
How to connect a battery in Parallel?
The positive terminal of the first battery is connected to the positive terminal of the second battery, the positive terminal of the second is connected to the positive of the third, etc. and The negative terminal of the first battery is connected to the negative terminal of the second battery, the negative terminal of the second is connected to the negative of the third, etc. So the batteries are connected: + to + to + and - to - to -. In this configuration, the capacity is the sum of the capacities of the individual batteries and voltage is unchanged. For example, if you take 5 6V 10AH batteries and connect the batteries in series, you would end up with a battery array that is 30 Volts and 10AH. If you connect the batteries in parallel, you would end up with a battery array that is 6 Volts and 50AH. By the way, this is how ordinary auto batteries are made. 6 2volt cells are put in series to give 12v battery and the 6 cells are just enclosed in one case. Many ni-cad batteries are done the same way.
我的电池能用多久？电池的寿命将与其使用方式、维护和充电方式、温度和其他因素有很大差异。如何连接Ser中的电池 IES？第一电池的正端子连接到第二电池的负极端，第二电池的正端子连接到第三电池的负极，等等。口角 组装电池的电压之和是单个电池的电压之和。所以电池是连在一起的：与-等等。电池容量不变 。如何并联连接电池？第一电池的正端子连接到第二电池的正端子，第二电池的正端子连接到第二电池的正端子。 e第三项的正性等。第一电池的负端子连接到第二电池的负端子，第二电池的负端子连接到负极。 (第三条)等。所以电池是连在一起的。在这种配置中，容量是单个电池容量和电压不变的总和。 。例如，如果你使用5 6V 10 Ah电池并将电池串联起来，你将得到一个电池阵列，即30伏特和10阿赫。如果你平行地连接电池，你会 最后的电池阵列是6伏特和50 AH。顺便说一句，这就是普通汽车电池的制造方式。6伏电池串联给12v电池，而6伏电池只是封闭i。 有一个案子。许多镍镉电池也是这样做的。
厂商在配置蓄电池时，所选用的设计容量是完全满足甚至超过负载不停电供电的功率容量和供电时间要求的，但是在UPS投入运行后，用户常常发现在市电停电后UPS不停电供电的实际时间远小于设计值，造成这种现象的原因，大多数情况下并不是最初配置时蓄电池的备用容量不够，而是蓄电池的容量没有发挥出来。造成蓄电池实际容量降低的原因很多，有电池质量问题，但更多的是使用和维护问题