丰江铅酸蓄电池DC40-12 12V40AH尺寸规格

丰江铅酸蓄电池DC40-12 12V40AH尺寸规格
丰江铅酸蓄电池DC40-12 12V40AH尺寸规格

美国丰江蓄电池/FULLRIVER电池/丰江电池质量保证；厂家为答谢广大用户朋友；再新的一年来临之际；特推出超大优惠幅度；详情请致电.

 

ULLRIVER currently provides above eight product series to our customers around the world. Beyond that, FULLRIVER has "Make-to-Order" capability to design and manufacture special type batteries that customers need. Please contact us directly if you have special technical or dimensional re for the batteries you want to order.

A.The amount of amp-hours (AH) a battery can deliver when discharged at a constant rate at 80°F (27°C) for the 20 Hr 72Hr and 100 Hr rates and 86°F(30°C) for the 5-Hr rate and maintain a voltage above 1.75 V/cell. Capacities are based on peak performance.

B.RC (Reserve Capacity) - the number of minutes a battery can be discharged at 25 or 75 amps at 27℃ (80℉) and maintain a voltage above 1.75v/cell.

C.CCA(Cold Cranking Amps) - the discharge load in amperes which a new, fully charged battery can maintained for 30 seconds at 0℉(-17.8℃)at a voltage above 1.2v/cell.

D.CA(Cranking Amps) - the discharge load in amperes which a new, fully charged battery can maintained for 30 seconds at 32℉ 0℃) at a voltage above 1.2v/cell.

E.Terminal type –Please see our terminal configurations.

目前，ULLRIVER向世界各地的客户提供以上八个产品系列。除此之外，富勒弗还具有“定货”的能力，可以设计和制造特殊型号的铜电池。 斯戴尔斯需要。如果您对您想订购的电池有特殊的技术或尺寸要求，请直接与我们联系。A.当Disch时，电池所能提供的安培小时(AH)量 在80°F(27°C)恒定速率下，20 HR 72小时，100 HR率，86°F(30°C)5-HR率，维持在1.75 V/细胞以上。能力是以最高业绩为基础的。B.RC( 在27℃(80℉)下，电池可以在25或75安培时放电，并保持在1.75V/电池以上的电压。冷曲柄AMPS-安培放电负荷 新的全充电电池在0℉(-17.8℃)电压高于1.2v/电池时能维持30秒。D.CA(Cingingamps)-一种新的全充电电池所能提供的安培放电负载。 维持30秒(32℉0℃)，电压高于1.2v/细胞。终端类型-请参阅我们的终端配置。

photovoltaic systems, and more. 
In 2008, we started research, development, and manufacturing of the HC series. This series is especially used for engine starting, which requires superior cranking performance at lower temperatures, for high current discharge. These batteries can also be fitted with the protective steel case and TP brass terminals.
In 2010, the FSG series was launched. Which use revolutionary Super GEL long life plate technology and are designed specifically for solar energy and wind energy applications. The designed life is 20 years in float service at 20℃.the battery can be used in a wide operating temperature range from -20℃ to 50℃.

In 2011, the DCG series was launched. Fullriver Deep-Cycle Gel（DCG）batteries are maintenance free and require no watering, while providing you with the unmatched and power of Fullriver's advanced deep cycle technology. Fullriver offers a complete portfolio of Deep-Cycle Gel（DCG）products, featuring these benefits: Long-lasting runtime and battery life in the most demanding of applications; Proprietary Gel formulation prevents stratification; Superior engineering offers exceptional durability.

随着UPS\EPS以及各类电源的使用，蓄电池的应用也越来越广泛。在我们平常的使用过程中，铅酸蓄电池会出现一些较小的损伤，这个时候，咱们可以采取一些临时性的措施对铅酸蓄电池进行简单修复。有条件的可以对其进行彻底修复！今天就为大家简单介绍几种铅酸蓄电池的修复之法。

1、铅酸蓄电池极桩烧蚀、断裂。当铅酸蓄电池极桩烧蚀、折断后，可用栽丝法修复。先将损坏的极桩从根部切平，在其断面中心钻？5mm、深15mm的孔，拧入m6×30的六角螺钉。将铁皮做的喇叭管放在极桩上，倒入加热熔化的铅水，冷却后取下喇叭管即可。

2、铅酸蓄电池外壳、上盖裂缝。在行车途中如果发现及时，应首先堵漏。将蓄电池倒向不漏的一侧，擦干外漏的电解液，在蓄电池盖处挖些封口料，在排气管上烘热后补漏。

如果是长条型裂缝，应用钢锯锯开v形槽后再补。对于不大的裂纹，可用胶粘剂粘接。方法是，先局部加热裂纹处，待变软后用刀沿裂纹切成v形小槽，然后把配好的树脂胶泥塞入待修补处平后用纸贴好，放在室内自行硬化后即可使用。