POWER SONIC蓄电池PS-1230发电专用

POWER SONIC蓄电池PS-1230发电专用
POWER SONIC蓄电池PS-1230发电专用

　Power-Sonic一直是主导力量在全球电池业务超过46年。由于我们的承诺我们公司蓬勃发展提供高质量的成本有效的电池,支持水平的服务是首屈一指的。

　　

　　我们骄傲我们的灵活性和能力迅速采取行动为市场带来新的行业领先产品。我们很自豪持有ISO 9001认证覆盖我们的组织的各个方面。

How long will my battery last?
The lifespan of a battery will vary considerably with how it is used, how it is maintained and charged, temperature, and other factors.

How to connect a battery in Series?
The positive terminal of the first battery is connected to the negative terminal of the second battery, the positive terminal of the second is connected to the negative of the third, etc. The voltage of the assembled battery is the sum of the battery voltages of the individual batteries. So the batteries are connected: + to - to + to - to + to -, etc. The capacity of the battery is unchanged.

How to connect a battery in Parallel?
The positive terminal of the first battery is connected to the positive terminal of the second battery, the positive terminal of the second is connected to the positive of the third, etc. and The negative terminal of the first battery is connected to the negative terminal of the second battery, the negative terminal of the second is connected to the negative of the third, etc. So the batteries are connected: + to + to + and - to - to -. In this configuration, the capacity is the sum of the capacities of the individual batteries and voltage is unchanged. For example, if you take 5 6V 10AH batteries and connect the batteries in series, you would end up with a battery array that is 30 Volts and 10AH. If you connect the batteries in parallel, you would end up with a battery array that is 6 Volts and 50AH. By the way, this is how ordinary auto batteries are made. 6 2volt cells are put in series to give 12v battery and the 6 cells are just enclosed in one case. Many ni-cad batteries are done the same way.

我的电池能用多久？电池的寿命将与其使用方式、维护和充电方式、温度和其他因素有很大差异。如何连接Ser中的电池 IES？第一电池的正端子连接到第二电池的负极端，第二电池的正端子连接到第三电池的负极，等等。口角 组装电池的电压之和是单个电池的电压之和。所以电池是连在一起的：与-等等。电池容量不变 。如何并联连接电池？第一电池的正端子连接到第二电池的正端子，第二电池的正端子连接到第二电池的正端子。 e第三项的正性等。第一电池的负端子连接到第二电池的负端子，第二电池的负端子连接到负极。 (第三条)等。所以电池是连在一起的。在这种配置中，容量是单个电池容量和电压不变的总和。 。例如，如果你使用5 6V 10 Ah电池并将电池串联起来，你将得到一个电池阵列，即30伏特和10阿赫。如果你平行地连接电池，你会 最后的电池阵列是6伏特和50 AH。顺便说一句，这就是普通汽车电池的制造方式。6伏电池串联给12v电池，而6伏电池只是封闭i。 有一个案子。许多镍镉电池也是这样做的。

PS and PSH-Series General Purpose used for :

Emergency Lighting

Burglar/Fire Alarms

Data Centers

Solar and Alternative Energy

Portable Communications

Wind Turbines

Robotics

Remote Monitoring

Portable Video E

Portable Lighting

Photographic E

Scientific Instruments

Test and Measuring E

and much more...

PG-Long Life and PHR-High Rate Series used for :

Communication & Telecom Systems

UPS - Uninteruptible Power Supplies

Power Station Applications

Remote Monitoring

Remote Area Power Generation

Remote Access Devices

and much more...

单节电池的电压都很正常，但UPS不能启动。

这时虽然单节电池电压正常，1.很可能是由于电池与电池之间的连接或电池与UPS之间的连接出现问题，比如：连接点不牢固或者是连接点有氧化现象，这时侯就需要祛除氧化物后重新连接。2.可能是UPS与电池连线的保险断了，如果是保险断了换一个保险即可。3.UPS与电池之间的连线很长、很细或中间有连接点，因此产生了很大的压降，导致UPS不能起动。

市电断电后UPS不能转到逆变状态下工作。

让UPS在市电状态下工作，将万用表设在电压档，表笔接在UPS背面安德森插头的里面，直接测量到达UPS的直流电压。此时，一个人观察万用表显示，另一个人拔掉UPS的输入线，观察断电瞬间万用表的显示，如果电压值瞬间下降很多，说明电池部分有问题，如果能够排除连接上的问题，而且电池也已经使用两年左右了，就需要考虑更换电池组。