美标105度600V控制电缆UL2501

 美标600V控制电缆105度UL2501

Style 2501 Multiple-conductor cable using non-integral jacket

Rating 105 deg C, 600 Vac, Cable flame.

Conductor 40 AWG min, solid or stranded.

Insulated Conductor Labeled or complying with Manufacturer's AWM Procedure

Assembly Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering Optional. Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Shield Optional.

Jacket Extruded PVC.

Diameter of cable under jacket* Minimum average thickness Minimum thickness at any point

0.700 inch or less 60 mils 48 mils

0.701-1.500 inch 80 mils 64 mils

inch 110 milsg 88 mils

2.501 inch and larger 140 mils 112 mils

* - Major diameter if cable is flat or oval.

Covering Optional, braid.

Standard Appliance Wiring Material UL 758.

Marking General.

Use Internal wiring or external interconnection of electronic e

UL2501型非整体式护套多芯电缆

额定值105摄氏度，600伏交流电压，电缆火焰。

导线至少40 AWG，实心或绞合。

绝缘导线贴有标签或符合制造商的AWM程序

组件由两个或多个导线、双绞线或一组绞在一起的绞合导线组成。导线或导线组可平行敷设，形成扁平、椭圆形或圆形电缆。导线的敷设未作规定。屏障层和/或填料是可选的。制造商应保存每个组件的完整说明。可使用相同或混合的AWG尺寸。

覆盖可选。在导体组件上，任何点的最小厚度为6密耳的挤塑聚氯乙烯。

屏蔽可选。

护套挤出聚氯乙烯。

护套下电缆直径*最小平均厚度任何点的最小厚度

0.700英寸或以下60密耳48密耳

0.701-1.500英寸80密耳64密耳

英寸110密耳88密耳

2.501英寸及以上140密耳112密耳

*-电缆为扁平或椭圆形时的大直径。

覆盖可选，编织。

标准电器布线材料UL 758。

一般标记。

使用电子设备的内部布线或外部互连。

美标600V控制电缆105度+美标控制电缆,600V美标电缆，UL2501电线电缆，耐105度UL认证电缆