molybdenum disulfide coating

 二硫化钼干膜润滑剂。In moving/mating components, the friction causes considerable loss of energy, poorer performance, and limits the wear life of the components. Molybdenum Disulfide can provide a low coefficient of friction, sometimes as low as 0.05 COF. This will be dependent on the humidity, cleanliness, and sliding conditions of your application.

Also, the molybdenum disulfide dry lubricant can:

Operate in a wide range of temperatures up to 600 deg F and maintain its lubricity in high load, high-speed conditions.

Be very effective in inhibiting corrosion as well when combined with the proper resins and binders.

Lubrication relies on the slippage along with the sulfur atoms. All of the properties of the lamella structure are intrinsic and no external form of moisture is required (as it is with graphite). Mos2 performs best when water vapor is not present, making molybdenum disulfide coating ideal for vacuum applications.

Coating Specifications

Appearance	Blue Silver Grey
Coefficient of Friction	0.06 to 0.15
Substrates	All ferrous or non-ferrous metal Man-made solids & plastics
Cure Time	No cure time is required when applied at ambient temperature
Applications	Chucks, Collets and Tools Circuit Breakers and Switches Compressors and Rheostats Cryogenic Pumps Electrical Connectors Engine and Drive Train Parts High Vacuum Applications Machine tools, Pins, Taps Magnetic Heads Pilot Valves, Chain Saws Rubber Gaskets, “O” Ring Seals Seamer Rolls Slide Mechanisms