PowerSonic蓄电池PS-12100F1容量充足

PowerSonic蓄电池PS-12100F1容量充足
PowerSonic蓄电池PS-12100F1容量充足

APPLICATIONS A whole range of CYCLIC applications including but not limited to:

• Fire and Security

• Telecommunications

CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger.

 FURTHER INFORMATION Please refer for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.

 • Emergency Lighting • Utility • Solar • Wind • UPS

应用范围广泛的循环应用，包括但不限于：针对电信充电器的火灾和安全性，提供了适用于电池的广泛充电器。 h各种能力。有关我们的开关模式和变压器式充电器的更多信息，请参考我们的网站。如果您有困难，请与我们的技术部联系咨询。 找到合适的充电器。欲了解更多信息，以获得完整的有用下载，如产品目录、材料安全数据表(MSD)。 S)、ISO认证等·应急照明·实用·太阳能·风能·UPS

 

FEATURES

• 10 – 12 year design life

• Absorbent Glass Mat (AGM) technology for superior performance

• Valve regulated, maintenance free spill proof construction

• Power/volume ratio yielding excellent energy density

• Rugged vibration and impact resistant ABS case and cover

• Gas recombination technology

性能优异的10-12年设计寿命的吸收玻璃垫(AGM)技术、阀调节的、免维护的防溢结构、功率/体积比产生优异 能量密度· 坚固的振动和抗冲击 ABS 外壳和覆盖· 气体复合技术。

 

CHARGING Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications.

 

充电循环应用：施加恒定电压电荷A20°时T2.35V/C-2.45V/C（14.1-14.7V，12V单锁定）c.初始充电电流应设置为小于0。25C安培.开关 负担费用以避免滥收费用。“浮动”或“备用”服务：施加2.25v/c-2.30v/c的恒压电荷(在20°C下，12v的Monobloc为13.5到13.8伏特)，当保持在此电压下时，蝙蝠 泰瑞将寻求自己目前的水平，并保持在一个完全充电的状态。温度补偿：循环和备用应用的充电电压应在r中调节。 与环境温度有关。随着温度的升高，充电电压应该降低，以防止过充电，并随着温度的下降而增加，以避免充电不足。进一步收费 关于温度补偿系数。

APPLICATIONS

• General purpose

• Emergency lighting

• Medical

• Fire and security

 

CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger.

充电器SonicSonic提供范围广泛的充电器。用于具有多种电容的电池S.请参考我们的网站了解更多信息在我们的开关模式和变压器T上 哈格斯。请与我们的技术部门联系以征求我的意见F您在找到合适的充电方面有困难

免维护铅酸蓄电池自行放电会导致电池容量不足，从而影响了电子设备的使用。而导致免维护铅酸蓄电池自行放电的原因如下：

1）极板或电解液中含有杂质，杂质与极板间或不同杂质间产生了电位差，变成一个局部电池，通过电解液构成回路，产生局部电流，使免维护铅酸蓄电池放电。


2）隔板破裂，导致正负极板短路。

3）活性物质脱落过多，并沉积在蓄电池底部，使极板短路造成放电。

4）免维护铅酸蓄电池壳表面上有电解液或水，在极桩间成为导体，导致铅酸蓄电池放电。

5）蓄电池放置久了，也会自行放电，不过在使用之前，灌入新电解液重新充电就可以了。

铅酸蓄电池自行放电对于UPS电源、EPS应急电源等电源的应用有很大的影响，在使用的时候，我们一定要注意铅酸蓄电池的使用以及维护，让铅酸蓄电池更好的发挥其作用。柏克UPS\EPS电源具有电池自动化管理软件，可以使电池在设定的时间内自动充放电，从而既保护了铅酸蓄电池的使用寿命又保护了UPS\EPS电源。