Stainless Steel Wire Mesh also called stainless steel wire cloth,according to weaving patterns,stainless steel wire mesh is classified into two types:plain woven and twill woven Stainless steel wire mesh.
Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
Specifications:2mesh/inch-635 mesh/inch.
The wire diameter from 4.0mm to 0.02mm, width up to 3.5m.
Material:SUS302,304,316,304L,316,316L stainless steel wire.
Stainless Steel Wire Mesh products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy etc.