Terluran? GP-35 | ABS | INEOS Styrolution Europe GmbH
Product Texts
Easy-flow injection moulding product with good ductility, intended for mouldings with thin walls and/or adverse flow length to wall ratio.
| Rheological properties | Value | Unit | Test Standard |
| Melt volume-flow rate, MVR | 34 | cm?/10min | ISO 1133 |
| Temperature | 220 | °C | ISO 1133 |
| Load | 10 | kg | ISO 1133 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus | 2300 | MPa | ISO 527-1/-2 |
| Yield stress | 44 | MPa | ISO 527-1/-2 |
| Yield strain | 2.4 | % | ISO 527-1/-2 |
| Nominal strain at break | 12 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | 125 | kJ/m? | ISO 179/1eU |
| Charpy impact strength, -30°C | 90 | kJ/m? | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 19 | kJ/m? | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 7 | kJ/m? | ISO 179/1eA |
| Thermal properties | Value | Unit | Test Standard |
| Temp. of deflection under load, 1.80 MPa | 92 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 95 | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 95 | °C | ISO 306 |