CE/EAC双认证 AC-FLEX812 柔性双护套屏蔽拖链电缆 300/500V (800万次)

CE/EAC双认证 AC-FLEX812 柔性双护套屏蔽拖链电缆 300/500V (800万次)

CE/EAC dual certification AC-FLEX812 flexible double sheathed shielded drag chain cable 300/500V (8 million times)

CE/EAC双认证 AC-FLEX812 柔性双护套屏蔽拖链电缆 300/500V (800万次)

导体材料:裸铜

导体等级:符合 DIN VDE 0295 6类导体或.IEC 60228 6类导体

芯线绝缘:PVC-J-105-003(2105-LF)

芯线标识:<0,5mm2:5芯及以下采用分色区分，符合n.DIN 47100，5芯以上多芯电缆采用芯线分色，白色油蛋打点区分;205 mm2.5芯及以下采用分色区分，含黄/绿地线，符合n.DIN 47100，5芯以上多芯电缆采用黑色芯线，白色油垩编号区分(如有特殊要求按需定制)

动力缆:黑色护套白色印字 U/L1;V/L2;W/L3;GN/PE

成缆:芯线<10:芯线以短节距分层纹合;芯线211:芯线采用两次复纹

内护套:D(9039-LF)(PVC填充料)

屏蔽:镀锡铜丝编织屏蔽 屏蔽密度≥80%

外护套:D(9039-LF)低损，防切割，低附着力

护套颜色:黑色(RAL9005);灰色(RAL7001);橙色(RAL2004);绿色(RAL 6018)

额定电压:25及以上:0.6/1KV;0.75至16:300/500V:0.5及以下300/300V

测试电压:3500V:2000V;1500V

导体电阻:+20“C 符合 DIN VDE 0295 6类导体 或IEC 60228 6类导体

小弯曲半径 固走:4xd

小弯曲半径 移动:7.5xd

移动速度:自支撑:max.8 m/s,滑行: max.5 m/s

导线长度:自支撑/滑行 max.400 m

加速度:max.100 m/s2

弯曲循环:<35 次/Min.寿命>800万次

工作温度 固定小值/大值:-30“C/+100“C(UL: 90“C)

工作温度 移动小值/大值:-30“C/+100°C(UL: 90“C)

阻燃等级:符合IEC;UL/CUIFT1、FT2

认证:CE;UL/CUL 如需UL认证需单独注明

印字标识 AeIn beike SHANGHAI AEIN WIRE& CABLE CO.LTD 型号规格电压 FLEXIBLE CONNECTION OIL RESISTANTABRASION RESISTANT CE 拖链标志 米标

抗油符合 DIN EN 小时+100°CUV,耐皇氧和耐候性符合EN 50396 和 HD 605 S2耐冷却液、微生物、弱酸碱

符合RoHS、符合 UL、CUL标准符合2014/35/EU-Guideline(“低电压指令”)CE

CE/EAC dual certification AC-FLEX812 flexible double sheathed shielded drag chain cable 300/500V (8 million times)

Conductor material: bare copper

Conductor grade: in accordance with DIN VDE 0295 Class 6 conductors or IEC 60228 Class 6 conductors

Core wire insulation: PVC-J-105-003 (2105-LF)

Core wire identification:<0,5mm2:5 cores and below are distinguished by color separation, in accordance with n DIN 47100, multi-core cables with more than 5 cores adopt core wire color separation and white oil egg dots for differentiation; 205 mm, 2.5 cores and below are distinguished by color separation, including yellow/green lines, in accordance with n DIN 47100, multi-core cables with more than 5 cores are made of black core wire and distinguished by white chalk numbers (customized according to special re)

Power cable: black sheath with white lettering U/L1; V/L2;W/L3;GN/PE

Cable formation: Core wire<10: Core wire is laminated with short pitch layers; Core wire 211: The core wire adopts two laminations

Inner sheath: D (9039-LF) (PVC filling material)

Shielding: Tin plated copper wire braided shielding, shielding density ≥ 80%

Outer sheath: D (9039-LF) low loss, anti cutting, low adhesion

Sheath color: black (RAL9005); Gray (RAL7001); Orange (RAL2004); Green (RAL 6018)

Rated voltage: 25 and above: 0.6/1KV; 0.75 to 16:300/500V: 0.5 and below 300/300V

Test voltage: 3500V: 2000V; 1500V

Conductor resistance:+20 "C in accordance with DIN VDE 0295 Class 6 conductors or IEC 60228 Class 6 conductors

Small bending radius fixed walking: 4xd

Small bending radius movement: 7.5xd

Movement speed: self-supporting: max.8 m/s, sliding: max.5 m/s

Wire length: self-supporting/sliding max.400 m

Acceleration: max.100 m/s2

Bending cycle:<35 times/min. Life>8 million times

Fixed small/large working temperature: -30 "C/+100" C (UL: 90 "C)

Working temperature shift small/large value: -30 "C/+100 ° C (UL: 90" C)

Flame retardant grade: in accordance with IEC; UL/CUIFT1、FT2

Certification: CE; UL/CUL: If UL certification is required, it should be indicated separately

Printing mark AeIn beike SHANGHAI AEIN WIRE&CABLE CO.LTD Model specification Voltage FLEXIBILE CONNECTION OIL RESISTANTABRASION RESISTENT CE drag chain logo meter mark

Oil resistance according to DIN EN hours+100 ° CUV, oxygen resistance and weather resistance according to EN 50396 and HD 605 S2, resistant to coolant, microorganisms, weak acid and alkali

Compliant with RoHS, UL, and CUL standards, compliant with 2014/35/EU Guidelines ("Low Voltage Directive") CE

CE/EAC双认证 AC-FLEX812 柔性双护套屏蔽拖链电缆 300/500V (800万次)

广泛应用于自动化数控加工以及同服电机或伺服编码器等拖链系统的信号及控制使用。符合EMC要求的铜丝屏蔽，防止电磁干扰。也可适用于干燥和潮湿的室内外环境以及起重机和输送设施等领域!以及自动化生产工序的数据传输、测量、反馈、编码器、旋转变压器、转速计、信号和系统的应用。

CE/EAC dual certification AC-FLEX812 flexible double sheathed shielded drag chain cable 300/500V (8 million times)

Widely used in automated CNC machining and signal and control of drag chain systems such as servo motors or encoders. Copper wire shielding that meets EMC re to prevent electromagnetic interference. It can also be applied to dry and humid indoor and outdoor environments, as well as fields such as cranes and conveying facilities! And the application of data transmission, surement, feedback, encoder, rotary transformer, tachometer, signal and system in automated production processes.