干性脱模剂
用途及作用：
脱模剂可广泛用于塑料,橡胶,金属,玻璃等工业制品生产的脱模,具有脱模效果好,脱模快捷,防锈润滑,不损模具及增加塑料表面光洁度。本品环保无任何有害物质,桂花香型。
类别及性质:
油性：脱模次数多,脱模效果好。
干性：适合二次加工,塑料,丝印,透明制品及高精度电子产品印刷。
中性：适用油性和干性之间使用。
用法：把瓶摇匀,用手指垂直按下喷咀顶部,并距待喷部位25厘米左右的距离喷射。
注意事项：本品属于第二代石油类制品,请勿靠近火源,避免强阳光长久直射,贮存在50C以下阴凉干燥处,
长时间贮放一层不能超过8箱,如不慎射入眼睛,请用清水清洗。
第三方质量控制：SGS RoHS PAHs MSDS SVHC 16P 卤素 TBBP-A认证
包装：24瓶/箱
含量：500ML
450ML两种容量
500ML单瓶重量：370克
450ML单瓶重量：350克
500ML纸箱尺寸：41.5X28X22.5cm
450ML纸箱尺寸：41X27.5X21cm
The product can be widely used in plastics, rubber, metal, glass and other industrial products production release, has good effect, quick release release, anti-rust lubricant, does not damage the mold and plastic surface finish. This product is environmentally friendly without any harmful substances, the osmanthus flower.
Oily : release number, stripping good effect. Dry: for two processing, plastic, silk screen, transparent products and high precision electronic products printing.
Neutral : suitable for oily and dry use.
Usage: the bottle shaking fingers, vertical press spray nozzle to be sprayed from the top, and the site of a distance of about 25 centimeters injection.
Note: This product is the fourth generation of petroleum products, please keep away the fire, avoid long sun point-blank, stored in the 50C following a cool and dry place,
Long time storage layer can not be more than 8 boxes, such as accidentally into eyes, please rinse with clear water.
Name: release agent
Category: oil dry three nature
Packing: 24 bottle / box
Content: 500ML
450ML two kinds of capacity
500ML single bottle weight: 370 gram
450ML single bottle weight: 350 gram
Carton size: 41.5X28X22.5cm 500ML
Carton size: 41X27.5X21cm 450ML