德国瓦克抗沾污 抗划伤 耐摩擦助剂BS1340

Product description

SILRES® BS 1340 is a nonionic, solvent-free, water

dilutable emulsion of a reactive polysiloxane.

Application

SILRES® BS 1340 is used in undiluted form as a  

hydrophobizing additive for aqueous masonry paints or  

plasters to increase water repellency, water resistance  

and water vapour permeability as well as to enhance  

processability and anti-blocking properties.

Suitable for:

- silicone resin emulsion paints and

silicone resin emulsion plasters

- silicate emulsion paints and plasters

- highly-filled emulsion-based coatings

- emulsion-modified whitewash

- stoppers

Paints and plasters modified SILRES® BS 1340 are  

characterized by an excellent water beading effect.

Processing

SILRES® BS 1340 can be added in undiluted form to  

aqueous masonry paints or plasters during or after  

their production. The addition of 1 to 3 wt.-% is  

recommended.

Storage

The 'Best use before end' date of each batch is shown  

on the product label.

Storage beyond the date specified on the label does  

not necessarily mean that the product is no longer  

usable. In this case however, the properties required  

for the intended use must be checked for  

assurance reasons.

Safety notes

Comprehensive instructions are given in the  

corresponding Material Safety Data Sheets. They are  

available on request from WACKER subsidiaries or  

may be printed via WACKER web site  

//www.wacker.com.

Product data

Typical general characteristics

Inspection Method

Value

Appearance

milky, white  

Solids content

approx. 50 wt. %

pH-Value at 25 °C

Indicator strips

8 - 9

These figures are only intended as a guide and should not be used in preparing specifications.