UL2570美标耐温80度600/1000V动力电缆

UL2570美标耐温80度600/1000V动力电缆

UL2570型非整体式护套多芯电缆

额定值80摄氏度，600、1000伏交流电压，电缆火焰。

绝缘导线至少40 AWG，贴有标签或符合制造商的AWM程序。

组件由两个或多个导线、双绞线或一组绞在一起的绞合导线组成。导线或导线组可平行敷设，形成扁平、椭圆形或圆形电缆。导线的敷设未作规定。屏障层和/或填料是可选的。制造商应保存每个组件的完整说明。可使用相同或混合的AWG尺寸。

覆盖（可选）6密耳或更重的PVC覆盖层可挤压在导体组件上。

屏蔽可选。

护套挤塑聚氯乙烯

导管架下芯组件的直径最小平均厚度任何点的最小厚度

0.700英寸或以下30密耳24密耳

0.701-1.000英寸60密耳48密耳

英寸80密耳64密耳

英寸95密耳86密耳

2.501英寸及以上110密耳94密耳

标准电器布线材料UL 758。

一般标记。

使用电子设备的外部互连或内部布线。

Style 2570 Multiple-conductor Cable using Non-Integral Jacket

Rating 80 deg C, 600, 1000 Vac, Cable flame.

Insulated Conductor 40 AWG min., Labeled or complying with Manufacturer's AWM Procedure.

Assembly Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering (Optional) a 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield Optional.

Jacket Extruded PVC

Diameter of core assembly under jacket Minimum average thickness Minimum thickness at any point

0.700 inch or less 30 mils 24 mils

0.701-1.000 inch 60 mils 48 mils

inch 80 mils 64 mils

1.501- 2.500 inch 95 mils 86 mils

2.501 inch and larger 110 mils 94 mils

Standard Appliance Wiring Material UL 758.

Marking General.

Use External interconnection or internal wiring of electronic e

UL2570美标耐温80度600/1000V动力电缆+美标动力电缆，美标耐温80度电缆，UL动力电缆600/1000V，UL2570电缆