SAE AS5272 TYPE I干膜润滑剂

 SANDSTROM LC-300 NOTICE

Sandstrom LC-300 is a lead free lac dry film lubricant coating containing molybdenum disulfide and corrosion-inhibiting pigments. This Heat Curing material prevents corrosion, galling, seizing and fretting. It is a low-friction coating that exhibits long wear life when operated at -320°F to +400°F under loads exceeding 100,000 psi.

LC-300 may be applied by brush, dip, dip spin or spray method. After it is heat cured, LC-300 is virtually unaffected by atmospheric and fretting corrosion, solvents, acids, oils and degreasers and is not re-softened at elevated temperatures.

Basic Product Guidance:

· Use LC-300 or #099 on metals that may be adversely affected by a 1 hour @ 400°F bake cycle.

· Use 9A on metals not affected by higher bake temperatures.

· Use #099 to meet low VOC re

Please consult Sandstrom Technical Rep during product selection process for best results.

OUTSTANDING FEATURE