PowerSonic蓄电池PS-12100直流屏用

PowerSonic蓄电池PS-12100 12V10AH直流屏用
PowerSonic蓄电池PS-12100 12V10AH直流屏用

Power Sonic的高速率PHR系列提供UPS系统和关键备份应用程序所需的恒定功率备份。PHR系列是专为高速率di设计和开发的。 充电应用程序，以确保恒定，可靠的电源时，用作电池备份或作为UPS系统的一部分。功率声波技术与精细Q技术相结合的先进制造与过程控制 保证程序的一致性和可靠性。

 

Power Sonic’s high-rate PHR series provide constant power backup that UPS systems and critical backup applications require. The PHR series has been designed and developed specifically for high-rate discharge application to ensure constant, dependable power when used as battery backup or as part of a UPS system. Power Sonic’s cutting-edge manufacturing and process control combined with meticulous assurance procedures guarantee consistent and dependable performance.

 

FEATURES

• High-rate VRLA battery

• Specifically designed for high-rate UPS and critical power backup applications

• Valve regulated, maintenance free spill proof construction

• Precision plate pasting for higher consistency with load testing to ensure uniform capacity

• Lead-calcium alloy grids and the use of high purity lead account for superior shelf-life characteristics

• Patented dual-paste process for enhanced active material bonding and computer guided volumetric electrolyte control for precision filling

• Rugged impact resistant ABS case and cover flame retardant to UL94:V-0 • High rate of charge and discharge

 

特点

·高倍率VRLA电池.专为高速率UPS和关键的电源备份应用设计.阀门调节，免维护的防泄漏结构.精密平台 用的载荷测试粘贴更高的稠度，以确保容量均匀

·铅钙合金栅格和高纯度铅的使用具有优良的保质期特性。 增强活性材料粘接和计算机引导容量电解质控制的双浆料工艺精密填充.坚固的抗冲击ABS外壳和覆盖阻燃剂

 

FEATURES

• Absorbent Glass Mat (AGM) technology for superior performance • Superb high-rate discharge characteristics ensures reliable performance in UPS and telecom applications

• Proven valve regulated technology that guarantees safe operation without maintenance

• Rugged impact resistant ABS case and cover, flame retardant to UL94:V-0 • Thick plate design and efficient gas recombination yield a service life of 10 – 12 years in standby mode APPROVALS

• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified

• U.L recognized

• ISO9001:2015 – management systems

 

特征

·优良性能的吸水性玻璃垫(AGM)技术.卓越的高速率放电特性确保UPS和电信应用的可靠性能.已证实的阀门调节TEC 保证安全运行而无需维护的 Hnology

 坚固的抗冲击 ABS 外壳和盖子，阻燃到 UL 94：V-0·厚板设计和高效的气体复合产生了一个 Ser 。 待机模式下的冰寿命为 10-12 年

 核准空运。 D.O.T.，I.A.T.A . ，F.A.A . 和 C.A.B . 核证

 U.L 承认

 ISO 9001：2015 - 质量管理体系。

CHARGING Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications.

后备式（Offline）正弦波输出UPS电源：其单机输出功率从0．25～2kVA左右。对于这种UPS来说，当市电电源电压在170～264V的范围内，它向用户提供经变压器抽头调压处理过的一般市电电源；仅当市电电源的电压低于170V或高于264V时，才向用户提供真正的"UPS逆变器"高质量的正弦波电源。后备式方波输出UPS电源：其单机输出功率从0．25～1kVA左右。对于这种UPS电源来说，当市电电压在165～270V左右时，它向用户提供经变压器抽头调压处理过的一般市电电源。当市电电源电压低于165V或高于270V左右时，它向用户提供具有稳压输出特性的50Hz方波电源。对于后备式方波输出UPS电源来说，当市电电源供电不正常时，由于它向用户所提供的交流电源是方波电源，并非正弦波电源，所以，在此条件下，不允许用户使用电感性负载（例如：电风扇、日光灯等）。否则，不是UPS电源本身的逆变器烧毁，就是造成将用户的负载损坏的局面。

有关专家按技术性能的优劣来排序的话，其顺序应为：在线式UPS电源、Delta变换器型UPS电源、准在线式UPS电源、后备式正弦波输出UPS电源、后备式方波输出UPS电源。就价格而言，排序方式正好相反。根据近几年的市场销售来看，后备式正弦波UPS电源因其性能价格比不好，已逐渐被淘汰