Armoured oil filled telecommunication cable USES: armoured communication cable mechanical protective layer can be appended to the structure of the cable, with the mechanical strength of the cable, antierosion capability, is vulnerable to mechanical and vulnerable to erosion area and design of telephone cable. Any kind of laying can be adopted, which is more suitable for direct buried laying in rock area.
注意：电线电缆安装应熟悉电线电缆性能的安装人员或专职技术人员担任，如仍有不清事项，请向相关技术部门或我厂技术部咨询。VV22VLV22VV23VLV23聚氯乙烯绝缘聚氯乙烯聚乙烯护套钢带铠装电力电缆敷设在室内、隧道内直埋土壤，电缆能承受机械外力作用。
采用对绞、对屏、总屏（或三线组绞合、组屏蔽、组屏总屏）等结构形式，具有介质损耗小，传输信号能力强、抗干扰性能好等特点，能可靠传输微弱模拟信号或数字信号，可广泛地用于发电、冶金、石油、化工、轻纺等部门的检测和控制用计算机系统或自动化仪表装置，以及一般的工业计算机用。
Plastic insulated control cable: GB9330-88 scope of application: this product is fit for ac rated voltage up to and including 450/750 control, monitoring circuit and protection circuit using features: 1, the conductor long-term allowed working temperature is 70 ℃. 2, when laying environment temperature 0 ℃ or higher. 3. Minimum bending radius: 4. For unarmored cable, it shall be no less than 6 times the outer diameter of the cable. 5. The cable with armor or copper shield shall not be less than 12 times the outer diameter of the cable. 6. The soft cable with screen shielding structure shall not be less than 6 times the outer diameter of the cable.
Fire control cable USES: this product has high fire-resistant ability, can withstand direct flame combustion and in a certain period of time not short circuit or open circuit fault occur, when the fire broke out, to put out the fire and reduce the loss. It is suitable for electric devices and control systems in places with high fire risk and fire control importance. Product standard: Q/ 320831nhn004-1996 25 ℃ ~ + 105 ℃ and 60 ℃ ~ + 200 ℃. Two kinds of refractory characteristics: comply with GB12666.6-90: A class: the flame temperature of 950 ℃ to 1000 ℃ class B: flame temperature 750 ℃ to 800 ℃ the burning time of 90 min burning time: 90 min additional voltage 500 v 3 additional voltage 500 v 3 A current a. flame retardant properties: Comply with class A of gb12666.5-90 test • minimum allowable bending radius of cable: The armoured not less than 12 times the cable diameter models: main material PVC insulated PVC sheathed low smoke low halogen low smoke zero halogen sheath insulation fluorine plastic insulation Low smoke low halogen sheath fluorine plastic insulation Low smoke zero halogen sheath fluorine plastic insulation fluorine plastic sheath Single strand conductors without shielding NH - KVV NH - KV D Y D NH - KFV DNH KFY D NH - KFF single strands of copper conductor shielding NH - KVVP NH - KV D Y D P NH - KFV D P NH - KFY D P NH - KFFP single stranded conductor copper tape screened NH - KVVP 2 NH - KV D Y D P 2 NH - KFV D P 2 NH - KFY D P 2 NH - KFFP 2 soft conductor shielding NH - no KVVR NH - KV D Y D R NH - KFV NH - KFY D D R R NH - KFFR soft copper conductor shielding NH - KVVRPNH - KV D Y D RP NH - RP NH - KFY KFV D D RP NH - KFFRP no shielding NH - steel tape armoured KVV NH - 22 KV D Y D - 22 NH - KFV NH - KFY D - D - 22 of 22 NH - KFF 22 note: PVC insulation structure by using the 105 ℃ resistance fuel used for refractory compound insulation structure. Specifications: Section 0.5 0.75 1.0 1.5 2.5 4 June 15 mm 2 above and below 2.5 mm 2 class A 1/0.80 1/1.13 1/1.13 1/1.38 1/1.38 1/1.13 1/1.13 PVC fluorine plastic sheath PVC fluorine plastic sheath class B 19/0.1 19/0.2 19/0.2 19/0.3 19/0.3 19/0.2 19/0.2 4-2-2-61 core 37 core 27 Core 4-14 core technical indicators: Performance can project technical indicators conductor dc resistance (20 ℃) or less Ω/km nominal section 0.5 0.75 1.0 1.5 2.5 4 6 class A 36.0 24.5 18.1 12.1 7.41 4.61 3.08 39.0 26.0 26.0 13.3 7.98 4.95 19.5 B test voltage 3000 V / 5 min not breakdown insulation resistance M Ω 1000 km or more refractory characteristics through the class A, Class B (according to gb12666.5-90 test) passed class A (according to gb12666.5-90 test).
建立健全的工作制度体系。任何工作的有效落实都离不开制度体系的制约与保证，电力设备的检修与维护工作也是如此。首先应结合电力企业相关工作的实际落实情况，完善或制定全面性的规章制度，并且严格要求其有效落实。制度中要突出工作具体内容、要求以及工作周期等。电力企业应结合实际编制设备检修作业指导书，有机融合相关制度标准及厂家设备安装维护手册的各项标准认真组织执行。建立工作质量追溯系统。为了进一步保证相关工作各环节的高质量完成，电力企业应针对设备检修与维护工作部分建立质量追溯系统，将不同工作内容进行具体划分，将工作职责落实到个人，这样可以提高员工对设备运行情况的全面掌握程度，同时还可以对员工的工作起到监督作用，并激发员工的工作热情，端正工作态度。
商用级电缆没有烟雾浓度规范，一般仅应用于同一楼层的水平走线，不应用于楼层的垂直布线上。◎通用级-CMG级（垂直燃烧测试VertialTrayFlameTest）这是UL标准中通用级电缆（GeneralPurposeCable），适用安全标准为UL1581。
产品规格型号额定电压V导体标称截面mm20.7511.52.54610芯数DDZ-KVVDDZ-KVVP450/7502～612～142～10DDZ-KVVP24～614～144～10DDZ-KVV227～617～614～144～10 使用条件(1。
缆芯包带：缆芯外包覆非吸湿性、非吸油性的绝缘带。屏蔽：用轧纹(或不轧纹)双面涂塑铝带纵包于缆芯包带之外，两边搭接粘合。护套：黑色低密度、中密度或高密度聚乙烯。识别标记：电缆外表面打印识别标记。标记内容：电缆型号、长度、公司名称及制造年份。
四、型号、名称、工作条件